Review of my SWD Registered Lightning Link

[FontanaHorseman]

Originally Posted by Quarterbore

I am not going to give you advise as your lawyer but I use it in my guns! There is no law that says I can not have a safety that goes SAFE/SEMI/SEMI, right?

Now, some states have special laws about no machinegun parts at all... In those states it is possible that they could argue that the trigger is still an M-16 part as well as the modified disconectors but with the bobbed hammer there is no way you could use these parts to get full auto anymore...

Well, unless you use them with your LEGAL AND REGISTERED lightning link!

That seems to be the underlying thought on several boards! I love the detail you have here on RDIAS and RLL.

I have talked w/m60joe about the mods needed to get several Stag lowers to work with the Link and I am thinking about trying the AR15 selector mod as a winter project. That will at least use up several spare selectors I have on hand before I get it right!

Thanks, FH

Also - any thoughts/cautions about modifying a standard AR Bolt Carrier to work with the link? I have turned one on a standard bench grinder down to .40 on the back then used a dremel to get it to .385 and it trips the link every time in testing but I have not taken to the range yet.
I wonder did this cause a temper problem with the bolt that I need to worry about? Guess I will find out later.

[Quarterbore]

I am lucky in that I have all the SP-1 carriers I need but I don't think that you will have a lot of problems with temper. M60Joe does carrier conversions on a mill and it might be worth it to send him a brand new carrier.

As fr converting a lower to use it with the link... personally, I would just buy a Bushmaster that will work right out of the box but that might be just me...

[FontanaHorseman]

Originally Posted by Quarterbore

I am lucky in that I have all the SP-1 carriers I need but I don't think that you will have a lot of problems with temper. M60Joe does carrier conversions on a mill and it might be worth it to send him a brand new carrier.

As fr converting a lower to use it with the link... personally, I would just buy a Bushmaster that will work right out of the box but that might be just me...

I am curious how hard it would be to use a standard drill press and carbide cutters to lower that shelf by .2" and also mill out the sides a little for the Link. I could do the sides w/a dremel since there is not much to cut away.

What do you think?

FH

[Quarterbore]

That would be hard on a drill press as they are not made to handle the lateral pressure like a milling machine but it is just an aluminum alloy so it might not kill your drill press?

It seems that most good gunsmiths would have a mill to do this so I would hire it out if it were me if I really didn't want to just buy another receiver. Then again, if you mess the receiver up it's not like it is that much money to replace it.

Good Luck!

[FontanaHorseman]

Back on the board after 5 years...man time flies...

Looking for an update on the RLL w/AR-10.

I am looking at a DPMS LR-10 and am just curious would it work with a RLL and what mods if any are needed.

Thx, FH

[sha-ul]

Welcome back, it's pretty quiet these days since we were taken down by waves of spammers. That part seems to have been fixed, we had a LOT of cleanup to do, but we are spam free now.
QB did have registration turned off for a while, but not sure if new members can sign up yet.