Quarterbore.Net Forums


Go Back   Quarterbore's Forums > National Firearms Act Weapons > Machine Guns
Home Forums Classifieds Photo Server FAQ Members List Calendar Search Today's Posts Mark Forums Read

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 12-14-2004, 07:29 PM
Quarterbore's Avatar
Quarterbore Quarterbore is offline
Administrator
 
Join Date: Dec 2004
Location: Valley Forge, PA
Posts: 1,598
The AR-10 and the SWD Lightning Link

Following is a collection of posts that I had posted on ARFCOM. I am woried that the post there will drop off their server so I am reposting it here where I can make sure I have it...

Here is the original thread: http://ar15.com/forums/topic.html?b=...896&page=1

Posted :: 6/4/2004 12:08:50 AM

After a rather long waite my Registered Lightning Link is transfered and I picked it up yesterday from Howard Block here is SE PA (Thanks Howard!). I dry fit the link in my Post-Ban Bushmaster with my Colt SP1 Carriers and my 5.56 and 7.62x39 uppers plus my 9mm upper with my 9mm Bolt that is already setup for the link. The timing of the link seems perfect with all three bolt/carrier/uppers and every thing seems to work fine... Now I just need a trip to the range

Well, I had mentioned this prospect in the past and now that I have the link and I have an AR-10 Carbine that is on it's way from another member's out of state FFL it is time to revisit the prospect of using the Lightning Link in the AR-10

I know that the AR-10 receiver is longer then the AR-15 receiver and I also know the AR-10 carrier will need to be modified. From there, I simply mill the AR-10 carrier to trip the link at the proper time for a full-auto AR-10 Carbine.

The Lightning link would still be the Machinegun and it is working the same way it always did and when the link is removed the AR-10 would still be a semi-auto rifle. The Lightning link is the machinegun and the AR-15 is just a part added to the link. An AR-10 would be just a different part added to the link and the both the AR-15 and AR-10 would be ran by the link in the same way as the link was originally intended to run.

I need to dig out my Eagle Arms AR-10 over the weekend and drop the link into the receiver and perhaps get some photos and drawings about how I may try this but I wanted some oppinions from the very knowledgable here about if this is a project that has a chance of working. I am also curious if there is a snowballs chance in hell the BATFE wouldn't agree with my logic described in the paragraph above?

Somebody stop me if I did a little too much day dreaming while waiting for the transfer to get done! Yea, I already have a great system and I really need to get a 300 Whisper Upper done but the thought of a full-auto battle rifle just sounds like something I have to try as well....
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:01 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.