|
Scoots,
As pug has suggested try different bolts (You do not have to change the carrier). There is enough variation in the various bolts out there so you might be able to find one the works.
If you are making your own brass, there is an alternative. You can make brass that just fits your chamber.
Start with the forming die set about 0.15" from contact with the shell holder and make one piece of brass and try it in your AR. The bolt should not close on this cartridge. Close the distance between the forming die and the shell holder what ever distance that you think will put you close and refrom that same brass and try is again. Continue to repeat this process until the bolt just closes on the shell. Now you have you press set to make custom cases that will fit you chamber.
320pf
|
Threaded Mode