Just watch out with the GenCuts and the shallow fullers. I've seen a lot of pieces floating around that aren't 100% correct, regardless of where they came from. The GenCuts must have an unmarked pommel in an early style scabbard with an early dated Fastex. Cutter plate should be the style with the screw driver at the tip, not the side. There were a bunch of shallow fullers made up with the Lan-Cay marking. The originals should not have the hyphen and should be in an early style scabbard with the screw driver at the tip. Should also have an early dated Fastex (92-93).
|