Ruger Blackhawk Cylinders

[tp555]

Stuff laying around for over 10 years. I got ruger blackhawk cylinders I made for a customer in stainless steel. He wanted 9mm,45acp and 44-40. So I made a few extras. Material is 416 stainless and professionally heat treated. The front pin is about .010" longer for fitting to the frame. I reverse engineered this. So the catch is indexing may be off on one of the bores ,but still good enough to shoot with. I will sandblast them if you want one. Price $25 add 7 for the shipping. Got 10 9mm, 3 44-40, 4 45acp. regards.

[sturgis57]

Am very interested in a 45acp cylinder, do you still have one. which model will they fit. thanks

[tp555]

Got 4 in 45 acp. You need to fit them to the frame.The front pin (bushing) is about .010" longer for fitting or I can machine it to the spec I used for the first one. Made for the blackhawk.regards.

[meister mash]

Dear Sir, what I wish to know is will these cylinders fit an old modle blackhawk? If so I would like one in 9mm. They are of course fully chambered? I can shorten the thing easy enough.

[tp555]

Pm sent with info.regards.

[sweetgator]

[QUOTE=tp555]Stuff laying around for over 10 years. I got ruger blackhawk cylinders I made for a customer in stainless steel. He wanted 9mm,45acp and 44-40. So I made a few extras. Material is 416 stainless and professionally heat treated. The front pin is about .010" longer for fitting to the frame. I reverse engineered this. So the catch is indexing may be off on one of the bores ,but still good enough to shoot with. I will sandblast them if you want one. Price $25 add 7 for the shipping. Got 10 9mm, 3 44-40, 4 45acp. regards.hi just wanted to know if you have any more blackhawk 9mm cylinders thanks

[sweetgator]

hi just wanted to know if you had any 9mm blackhawk cylinders left thanks

[tp555]

Got around 8 or so in 9mm.regards.

[fireball168]

PM sent on multiple purchase.