Ruger Blackhawk Cylinders
 

Stuff laying around for over 10 years. I got ruger blackhawk cylinders I made for a customer in stainless steel. He wanted 9mm,45acp and 44-40. So I made a few extras. Material is 416 stainless and professionally heat treated. The front pin is about .010" longer for fitting to the frame. I reverse engineered this. So the catch is indexing may be off on one of the bores ,but still good enough to shoot with. I will sandblast them if you want one. Price $25 add 7 for the shipping. Got 10 9mm, 3 44-40, 4 45acp. regards.

re-ruger cylinder
 

Am very interested in a 45acp cylinder, do you still have one. which model will they fit. thanks

Got 4 in 45 acp. You need to fit them to the frame.The front pin (bushing) is about .010" longer for fitting or I can machine it to the spec I used for the first one. Made for the blackhawk.regards.

modle ?
 

Dear Sir, what I wish to know is will these cylinders fit an old modle blackhawk? If so I would like one in 9mm. They are of course fully chambered? I can shorten the thing easy enough.

Pm sent with info.regards.

re 9mm cylinders
 

[QUOTE=tp555]Stuff laying around for over 10 years. I got ruger blackhawk cylinders I made for a customer in stainless steel. He wanted 9mm,45acp and 44-40. So I made a few extras. Material is 416 stainless and professionally heat treated. The front pin is about .010" longer for fitting to the frame. I reverse engineered this. So the catch is indexing may be off on one of the bores ,but still good enough to shoot with. I will sandblast them if you want one. Price $25 add 7 for the shipping. Got 10 9mm, 3 44-40, 4 45acp. regards.hi just wanted to know if you have any more blackhawk 9mm cylinders thanks

re cylinders
 

hi just wanted to know if you had any 9mm blackhawk cylinders left thanks

Got around 8 or so in 9mm.regards.

PM sent on multiple purchase.