 |
|
11-19-2006, 02:18 PM
|
 |
Senior Member
|
|
Join Date: Jan 2005
Location: Bellevue, Nebraska
Posts: 121
|
|
|
Rare Blade
I just happened by luck to get a rare Lancay m9 Blade.. It happens to be a first contract blade with no step in back of the saw teeth, with the second contract black blade with the LanCay markings instead of the Lan-Cay markings. According to the information 200 of these first contract blades were set aside due to the tips being thinner than the specifications back in 1995. Paperwork was lost for a request of the variance and found later. When it was approved it was already the start of the second contract so they were used and the black finish of the second contract was applied.. Unfortunately it was retipped and sharpened along with being buffed with a mirror finish on the blade, but it still has at least 20 percent or more of the black finish showing...I will try to take a picture of this but may not be able to, with the mirror finish on part of the blade... Rex
|
11-19-2006, 09:37 PM
|
 |
Super Moderator
M9 Bayonet Collectors Club
|
|
Join Date: Mar 2005
Posts: 675
|
|
|
Hi Rex,
I'd love to see some photos of your bayonet. Does it have a fullered blade? The first contract blades that didn't meet spec but were then later used DID have the step in the back edge of the blade in front of the muzzle ring. The first bayonets of the second contract were marked with the original "LanCay" marking. It was right around the time of the second contract that they changed over to the hyphenated name. If your blade does not have the step in the back edge of the blade I would guess that it doesn't have the fuller either. This would make it an early second contract blade.
|
11-19-2006, 09:50 PM
|
|
Senior Member
|
|
Join Date: Jan 2005
Location: Bellevue, Nebraska
Posts: 121
|
|
|
Bill, as usual you probably right...I just thought it might be so..It is not fullered and doesn't have the step in back of the saw teeth, but it is marked LanCay without the hyphen.. Rex
|
11-19-2006, 11:17 PM
|
|
Super Moderator
M9 Bayonet Collectors Club
|
|
Join Date: Mar 2005
Posts: 675
|
|
|
Hey Rex,
Still a decent piece. You don't see many of the second contract pieces without the hyphen. Some of them also have a hollow ground blade.
|
11-20-2006, 10:20 AM
|
 |
Administrator
|
|
Join Date: Dec 2004
Location: Valley Forge, PA
Posts: 1,598
|
|
So, where are they?
|
11-20-2006, 12:39 PM
|
 |
Senior Member
M9 Bayonet Collectors Club
|
|
Join Date: Mar 2005
Location: Italy
Posts: 487
|
|
|
Hello all,
if I'm correct this should be a bayonet from the first part of the second contract.
|
11-20-2006, 05:50 PM
|
|
Super Moderator
M9 Bayonet Collectors Club
|
|
Join Date: Mar 2005
Posts: 675
|
|
|
Yup, you got lucky; it's an early second contract. Keep in mind that these are not particularly rare, just no where near as prolific as the hyphenated Product Improved model.
|
11-21-2006, 04:18 AM
|
|
Senior Member
M9 Bayonet Collectors Club
|
|
Join Date: Mar 2005
Location: Italy
Posts: 487
|
|
|
|
07-29-2007, 12:35 PM
|
|
Junior Member
|
|
Join Date: Jul 2007
Location: UK
Posts: 4
|
|
|
Hi all!
I'm new here and have a query. I have an M9 similar to those in this thread in that it has the bead-blasted dark grey finish, its marked "LanCay" without the hyphen, it doesn't have a fuller and does have the step up in front of the guard, the "M9" stamp is over to the left and the sheath has the screwdriver/ wire cutter fitting and a sharpening stone on the back! The Nexus buckle is dated '92.
Could somebody here identify which model this is and give an approx idea of it's collectability and value.
Any help would be gratefully accepted!
Nice site you guys have here!
|
| Thread Tools |
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -4. The time now is 02:46 AM.
|
