Quote:
|
Originally Posted by Quarterbore
I am not going to give you advise as your lawyer but I use it in my guns! There is no law that says I can not have a safety that goes SAFE/SEMI/SEMI, right?
Now, some states have special laws about no machinegun parts at all... In those states it is possible that they could argue that the trigger is still an M-16 part as well as the modified disconectors but with the bobbed hammer there is no way you could use these parts to get full auto anymore...
Well, unless you use them with your LEGAL AND REGISTERED lightning link!
|
That seems to be the underlying thought on several boards! I love the detail you have here on RDIAS and RLL.
I have talked w/m60joe about the mods needed to get several Stag lowers to work with the Link and I am thinking about trying the AR15 selector mod as a winter project. That will at least use up several spare selectors I have on hand before I get it right!
Thanks, FH
Also - any thoughts/cautions about modifying a standard AR Bolt Carrier to work with the link? I have turned one on a standard bench grinder down to .40 on the back then used a dremel to get it to .385 and it trips the link every time in testing but I have not taken to the range yet.
I wonder did this cause a temper problem with the bolt that I need to worry about? Guess I will find out later.
Threaded Mode
