|
Case sticking issues
DonT,
Case neck wall thickness or case length vs headspace could be your problem.
If the case neck is too thick it will cause the case to bind between the bullet and chamber wall. Need to check and see what the chamber neck diameter is.
If the case is too long, same basic thing happens but the end of the case neck gets stuck between the bullet and chamber throat. Either one ould be casuing teh cases to stick.
Try chambering an unloaded case that has been resized and see if that functions. Then we can work on the loaded cases.
The gas tube setting should just be put on the back burner till you get the system to function manually without binding.
This should get you started.
You can contact me direct
john at krtraining dot com
or keep it on the boards for others to chime in and in case someone else has that same problem.
Shoot Early, Shoot Often, It's the Chicago way.
John
|
Threaded Mode