Brass Services / For Sale

[Hoser]

Originally Posted by Hoser

Please keep in mind that there are many flavors of the 300 Whisper/Blackout out there. I do all the heavy lifting for you, I trim it to 1.355 and take care of the primer pocket crimp. With some chambers you can just add a primer, powder, bullet and you are good to go. Other chambers you might have to run the brass through a full length resize die. I strongly recommend doing it anyway, but that is just me. I even full length resize all brass, virgin or not. I would rather ship brass that needs the shoulder pushed back a couple thousandths than send you overworked brass that will cause headspace issues and short brass life.

Just finished up another bunch of 300 Whisper Rimmed (parent case, 357 max) brass for a friend.

Please send me a PM or an email before you send me any 223/5.56 brass to process so I have a way to contact you.

[srm109]

Hoser makes fantastic brass for a great price! But as he said, when it gets to the end user it still might need some finish work.

I discovered that the Lake City brass that I purchased from him is just a little too thick in the neck for my 247gr NOE cast bullet. The bolt on my AR15 does not want to close when the round is chambered. I'll probably need to run an inside neck reamer in a few to get them to work properly.

No fault of Hoser's, whom I will purchase from again in the future, just passing along the information.

[Hoser]

Originally Posted by srm109

just a little too thick in the neck for my 247gr NOE cast bullet. The bolt on my AR15 does not want to close when the round is chambered.

If you think that you might have a tighter chamber, let me know and I can send out a sample of my brass to make sure it works.

[HK91]

I got 500 rounds of brass a few months ago, worked great. Will be ordering some more soon, especially good deal at the new lower prices.

Kelly
HK91

[Hoser]

Got done shooting the Thunderbeast Team Challenge this weekend in Logan NM. One heck of a good time. This might be the toughest match I have ever shot.

I almost used my 20 inch 300 WTF upper but went back to the LaRue OBR Lite in 223 with a Loopy 1-8 at the last minute when I heard there might be carbine targets past 500 yards. The longest shot for me was just under 600 yards, and I had to shoot it off sticks...

The night stages were a pressure cooker with minimal shots and lots of points on the line.

http://www.snipershide.com/forum/ubb...2663133&page=2

There was lots of my brass on the prize table as there will be again next year.

Thanks to all the match staff, match sponsors and shooters.

[snipecatcher]

Looks like fun! Thanks for supporting the shooting sports with your brass. I'm still working on losing the last batch I bought from you. It may be a few more months.

[Hoser]

Back in town and making chips...

[Hoser]

Just got done with another batch of brass. Let me know if you need more.

Still turning your 223 brass into 300 Whisper/Blackout brass. Under a 2-3 day turn time.

[Hoser]

Just a heads up.

204 Ruger brass does not make good 300 WTF brass.

I had a guy send me 500 pcs for conversion. The brass is way too thick in the newly formed neck area.

Time to back downstairs and play with my new Giraud annealer.

[sha-ul]

Glad to see you are still around, I figured you were quite busy around Colorado Springs.& I got a bit worried when one of the aerial tankers went down.