Brass Services / For Sale

[Mike Bell]

Dang....a week late

[Mike Bell]

Nothing like a good piece of brass. Thanks Hoser.


People, If you send in good clean 223 once fired brass.....You will get good clean whisper brass back!! Got my Hoser brass, now Im ready to start working up some loads finally.

[Hoser]

Spent the past couple weeks getting caught up and ahead of demand.

Lots of brass in stock.

[Hoser]

Uncle Sam has decided to send me back to Texas for the fires.

If you have sent me brass and I have it today, I will get it done and turned tonight. Otherwise I will get it done as soon as I get back in town. That will be 1-2 weeks or as soon as the fires go out.

Those of you in Texas, look for me in the C-130 with a big #2 on it.

[Hoser]

Im back.

The humidity came up a few points and the wind laid down a bit.

[Crawdaddy]

Hoser,

It's still plenty dry and very windy around here in North Texas. We definitely appreciate you guys in the C130s - wouldn't surprise me if you end up back here before too long. Unless we get some serious rain in the right places pretty quick it's going to be a very long summer.

Great picture, by the way!!!

Crawdaddy

[Hoser]

Originally Posted by Crawdaddy

Hoser,

It's still plenty dry and very windy around here in North Texas. We definitely appreciate you guys in the C130s - wouldn't surprise me if you end up back here before too long. Unless we get some serious rain in the right places pretty quick it's going to be a very long summer.

Great picture, by the way!!!

Crawdaddy

Glad we were able to help. I was shocked when they told us to go home.

I am dragging my feet getting the firefighting systems offloaded as they are a huge pain to on/offload.

[dvanncvann]

Just got my 2nd order of brass from Hoser. Excellent brass and quick turn time.

[skippy]

Got my order in the other day...nothing but good to say!! Was without a doubt, the easiest, fastest, mail order transaction I have ever done! I sure won't be making them one-at-a time anymore!

[scorge30]

At present I have only one .300 Whisper - an Encore SS 12" T/C Custom Shop barrel that the previous owner ordered in .30 Herrett. I sent it to Mike Bellm in Grants Pass OR, who reamed it out to .300 Whisp-R improved.

Since my barrel already had the rim cut for its original cartridge based on the .30-30 Winchester, I have the option of using either .221 Fireball or .357 Rem Maximum brass to make .300 Whisp-R improved.

I have been making them one at a time but it is slow. Mike Bellm recommends annealing the cases prior to resizing or they will split. Using .357 Rem Max brass does give a insignificant increase in case capacity but with sharper shoulders.

http://www.bellmtcs.com/store/index.php?cid=570

My dies are from CH4D and are marked .300 Bellm - Whisper.

http://www.ch4d.com/

Can I send .357 Rem Max brass and have it treated the same way as the other brass?