Question KAC SR-25 FF RAS/Armalite AR10 Forends

[Danhits]

Anyone remember for sure if a KAC SR-25 FF Rifle Length RAS Forend will fit/work on:
an Armalite AR10A4 20" with Standard Factory Handguards?
or on:
an Armalite AR10T SS 24" with Factory Fiberglass FF Tube?

Have been kicking the question around for a week and no one can remember for sure. Seems like I remember it would not fir on the AR10A4 but that it would fit on the AR10T but would be a tight fit and cause some heat retention in the area of the chamber end of the barrel.

Anyone remember for sure?
Thanks,
Dan
Danhits@aol.com

[Quarterbore]

Yes, this will DEFINATELY work with an AR-10! You only need the AR-10T barrel nut and the colar for your first example or use the parts that come with your second.

Do you have a source for one of these? I have wanted one for a LONG time but I do like my SWS float tube I am using. Still would like to build a better Mk 11 Mod 0 clone with the real tube if I could get one.

As for the space issue, if you were shooting full auto this MIGHT be an issue but you are correct that the AR-10 barrel tends to be a little heavier in the rear then the SR-25 but lots of guys use these without problem... Get it if you can find one at a price you are willing to pay!

[Danhits]

Thanks for the info. I might get lucky. If I happen to lucky times two I will let you know. I know you have been interested in these and looking for one just like me for quite some time. Wish me luck. I'm going in.

[Scoop]

I bought this one from Excalibur Arms a couple of years ago. You might check with them. Who knows, you might get lucky. http://www.sr-25.com/index.htm