Quarterbore.Net Forums


Go Back   Quarterbore's Forums > 300 Whisper Forums > 300 Whisper Rifles and Pistols
Home Forums Classifieds Photo Server FAQ Members List Calendar Search Today's Posts Mark Forums Read

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old 04-05-2011, 10:25 PM
Titleiiredneck Titleiiredneck is offline
Super Moderator
 
Join Date: Jan 2008
Posts: 329
Quote:
Originally Posted by Pyrex View Post
I'm looking to build my first .300 here soon. I'm going to be building a midlength AR-15 in .300 whisper or fireball.

One of the things that I'm still a little confused about is forming the cases. Now, I understand you can buy a die set when essentially does forms the case. However, it seems SSK recommends to form from .221 - which for me doesn't make much sense - because the whole appeal of the cartridge is the cheapness - I can use .223 cases and .308 surplus projectiles - best of both worlds. I just want to straighten out that I CAN use .223 brass to form the .300 cases?

Also, as far as gas blocks, everyone recommends an adjustible gas block for the large and smaller projectiles and pressures. If I were to just install a basic gas block on a 16" .300 whisper barrel with a pistol gas block location, I would presume it would probably be best for subsonic rounds - would that be right? What's a reasonable but effective adjustable block you might recommend?

Thanks for everyone's time, I really appreciate it.
paladin's gas block, TP555 on here, you can buy brass from hoser on here cheap also. The chamber will work with 223 but I wouldnt reccomend a ssk upper since you can get the same quality for cheaper on here from spook or tp555 or other vendors on the net. You should b ok with super and subs with a pistol position 16" upper but you may have to play with handloads some to find the right combo.

If I were doing this over then this is personally what I would do.

Side charging upper/carrier "mega machine upper the bcg they reccomend also"
yhm ff tube "works with tp555's block if i am correct"
spooks barrel threaded 5/8x24 tpi
magpul 20 round mags.
heavy buffer

upper should run around $550 minus the barrel and block since their prices to machine are dependent on material cost at that time. You can also get a 300 blackout barrel and use the same brass/data as the whisper.

The reason I say the side charging upper is that you can cut the gas off and use it simmilar to a bolt action which is the cats ass when suppressed fyi.


Just my personal opinion and 2 cents free of charge
__________________
www.1050fps.com
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:23 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.