Quote:
Originally Posted by Fastshooter03
Which type did you get from Richard's?
I was looking at their tackdriver type or maybe the tatical style.
I've already done a bench prone in electric blue for a 22 marlin.
It did take a bit of work but it looks great.
Nick
|
It was listed as a Classic if I recall correctly.....not sure which. Its pretty much a monte carlo style....roughly. I don't remember exactly what I ordered but I did order the barrel channel wider than normal for my 1" integral suppressor tube. I had to inlet for the bottom metal and most of the receiver. The stock is about 1/2" wider than it needs to be and about the same in height. I don't know if thats normal but its definitely not a 90% drop in. I knew I was going to have to do the bottom inlet but they were supposed to have the top side done. They told me they didn't have a pattern for the single shot receiver so I asked that they not do any inlet on the bottom except for the hole the trigger goes through. They didn't cut that hole either. . .
In any case, I've got no barrel blank for the receiver at the moment and its at the bottom of my work pile. I have to do customer guns first ....
Later
Frank
Threaded Mode