|
Sorry Dannix I had read your post back wards. My 9mm load is 145 gr LRN over 3.8 grains of Tightgroup. They hit steel plates like a sledgehammer. I use them in the subgun matches so I pull singles, bursts, and mag dumps on the plate racks. I use one of my Python suppressors which is a dedicated Uzi SMG suppressor. I think I had about 4000-5000 rounds threw it when I got all the crap out of it. I get the bullets from Spacecoast bullets. They use the blue lube on them. As soon as I use up the bullets I have I am going to switch from the 9mm (.356.Dia) to the 38 Cowboy bullets which are .358 dia. They are the same bullet, one of the guys I shoot with just told me about the 38 bullets.
I don't know if I would shoot these out of a handgun as they are really hot loads.
|
Threaded Mode