|
Is the 300 Whisper model for subsonic loads only or is it rated for supersonic Whisper loads as well?
EDIT - Found the answer on the thread above:
Can the MK 12 RECON 300 Whisper Suppressor be used with supersonic ammunition? How about 6.8 spc subsonic? What thread is the mount? 1/2-28 or 5/8-24?
Since there is a wide range on the 300 Whisper supersonic fps speeds and pressures and with those being out of my control as to which load would be used, I'm going to have to say that the MK 12 RECON is for subsonic ammo only.
As for the 6.8 spc, I've not done any testing nor do I know of any customers that have either, so I can't comment on that round. Again I would suggest that you only use the Mk 12 RECON with subsonic 300 Whisper and subsonic 300 AAC BLACKOUT rounds.
No you can't fire 9mm through the RECON either, as the baffle stack has a tighter aperture hole for the 300 Whisper round.
I can offer the MK 12 RECON in 1/2"x28tpi, 1/2"x32tpi, 1/2"x36tpi, 5/8"x24tpi, and I can even do custom threads pitches at a small extra cost.
Last edited by Crawdaddy; 11-24-2010 at 11:46 AM.
|
Threaded Mode