I have some problems with a stuck case in my resizing die. Got a stuck case removal kit on the way from CH4D.
Anyhow I did have 30 rounds loaded up. Took it to the range today.
Load was 26.0 grs H335, Remington cases, CCI 400 small rifle primers with a 90 gr Sierra Game Point.
Used a few rounds to get the gun sighted in and fired 7 shots over a buddy's Chrony Alpha ans the sun was starting to set.
Speeds were 2606, 2604, 2594, 2589, 2579, 2606, and 2570. The online SD Calculator I used says that's a SD of 14 FPS.
5 shot group at 100 yards was about 1 1/2" with 3 shots touching and another 2 shots touching about an inch and a half away. I only loaded 3 shots in the mag and then decided to shoot a 5 shot group and loaded 2 more shots before looking through the scope, so I don't know if my movement caused me to shoot 2 separate groups or if that's what the group is.
Gun functioned just fine with the gas port as 320pf shipped it. I even put it on a different lower with an A2 stock and shot a few rounds and they functioned fine as well.
When I get the stuck case out I'll play with it some more.
I do have 100 prepped cases so I should be able to load up some more even if I have to send the dies back to CH4D.
|