Quote:
• Hornady 110 V-Max, OAL: 2.000
• 110 TSX, 2.015 OAL
• Sierra 155 Palma, 2.150 OAL
• Sierra 220, 2.089 OAL
• Lapua B416 200 grain, 1.960 OAL
• Hornady 150 FMJ-BT 3037, 2.065 OAL
• Nosler Ballistic Tip 125 grain, OAL: 2.085
• Remington AccuTip 125 grain, OAL: 2.085
• Hornady 130 SP #3020, OAL: 2.010
• Sierra H2120 125 ProHunter, OAL: 1.950
• Speer TNT 125 1986, OAL: 2.010
|
I got a chance to get out and field test a couple of these OAL's. As stated before, some of them are VERY short. I found that with the longer, heavier bullets, this short OAL doesn't cause any problems and so may be a benefit. In my test the 208gr AMAX fed perfectly.
With the shorter, lighter bullets, this was not true. I tried both Sierra 110gr JHP and Hornady 110gr AMAX and have serious feeding issues with both using the short OAL.
The round would end up stovepiped between the bolt and the barrel extension. I'm not exactly certain how this happens but it seems the very short OAL allows the case rim to clear the mag lips before the nse of the bullet is far enough into the chamber to stabilize it and keep it moving into the chamber. Thus the round can flip vertically under pressure from the bolt and we end up with a jam.
I tried this a bunch of times and had prob 7 or 8 jams in about 20 rounds. As soon as I went back to the longer OAL, those jams disappeared.
FWIW this all occurred with a known good PMag.