Brass Services / For Sale

[Titleiiredneck]

Originally Posted by MarkK

I have had Hoser process brass for me twice (2K total). They do not come any better than him to deal with.

Mark K.

ditto, ordred 500 and all look concentric and top notch!

[sha-ul]

Originally Posted by Hoser

And for those looking for completed brass, I do have some once fired Lake City. $22 per 100 delivered.

If this offer is still good, I will be placing an order in a few weeks

[Hoser]

Originally Posted by sha-ul

If this offer is still good, I will be placing an order in a few weeks

Yup. The offer is still good. I have about two 5 gallon buckets of mixed headstamp brass.

[Hoser]

Still making brass for people.

I can tell you that a 5 gallon bucket of brass shavings is reallllly heavy...

[sha-ul]

Originally Posted by Hoser

Still making brass for people.

I did over 10K brass in Sept for various people and I also have a few thousand pieces on hand all ready to go.

I can tell you that a 5 gallon bucket of brass shavings is reallllly heavy...

on the bright side, those shavings should be worth what .25 per pound?

[Spook]

Just got my hands on some of Hosers brass , nicest Whisper brass I've ever laid eyes on.... and I've seen a bunch of the stuff. Bravo Hoser!

[Wsinnett]

Hoser,
I want to thank you for the great job you did making my whisper brass..
You were fast, honest and a great value.. when i bought my whisper that was the very thing I needed.. I want to thank you for the 3000 perfect rounds you made for me.. please keep me posted if you are moving or change your email... you are a blessing... also, I took a huge buck with the 300 subsonic bullet.. you did great... thanks, Bill Sinnett Blythewood SC
Airborne

[Hoser]

Originally Posted by Hoser

When you send me brass, please make sure you do the following.

1. Make sure it is clean.
2. No Berdan primers.
3. It has *NOT* been resized or processed.
4. Enclose a note telling me how to provide you a tracking number.
5. Let me know ahead of time that I have brass headed my way.

Dillon Trimmer Dies are also a resize die. If the case has already been resized, things go downhill in a hurry.

Just to make sure everyone is 100% clear.

Sized/processed brass will not work. The trimmer die I use needs to be able to hold on to the case while the trimmer blade does the work. If the case has been resized, the case just spins inside the die. If the cutter grabs on and tears off a big chunk of brass and locks things up, it will destroy a $250 Dillon trimmer motor.

I also need a way to contact you. Please put a note of some sort in the box...

[sha-ul]

the brass arrived yesterday, thank you very much

[Hoser]

Originally Posted by Wsinnett

Airborne

Freefall...