Quarterbore.Net Forums

Fritzcat · #1 09-20-2010, 02:45 PM

I picked up a NEF Handy rifle in 44 Mag. Has anyone had any experience with these sub-sonic and suppressed? Barrel twist? bullet weights? charges? The barrel is 22", but if it works good with subs I can shorten it and do a Form 1 can. Any advice, would I be wasting my time. I have a 458 Socom bolt gun and waiting on my Form 1. I ran across this at a garage sale and thought I would try. What do you think?

dieselten · #2 09-20-2010, 05:00 PM

I have a 44 mag handi with barrel cut to 17" I use a AAC Evo 45 can on it. The barrel has a very slow twist, I think it is 1-38". I have tried some 240 bullets at 1050 and have had average accuracy, but that could be my gun. I would not try anything heavier due to the twist

Fritzcat · #3 09-20-2010, 07:54 PM

What powder charges does it like the best?

dieselten · #4 09-21-2010, 02:36 PM

i tried trail boss but could not get enough powder into the case so i switched to unique with a good crimp. can't remember exact charge - just enough to be around 1000 fps.

redtazdog · #5 09-24-2010, 02:49 AM

TC 44 mag 1:11 twist barrel 240 and 300 grn pills
give me 2" groups and sometimes better when I weigh each powder charge
by hand.
I use AA #7 for 240 and 300 grn sub loads, this thing is as quiet as
any of my semiauto's in 22 lr suppressed.
Making a 1:11 twist barrel for a lever gun now

Fritzcat · #6 09-27-2010, 12:56 AM

That is a nice looking rig.

LouBoyd · #7 10-02-2010, 10:42 PM

[QUOTE=redtazdog;23546]TC 44 mag 1:11 twist barrel 240 and 300 grn pills
give me 2" groups and sometimes better when I weigh each powder charge
by hand.
I use AA #7 for 240 and 300 grn sub loads, this thing is as quiet as
any of my semiauto's in 22 lr suppressed.
Making a 1:11 twist barrel for a lever gun now

Who makes a .429" bore barrel with an 11" twist?

redtazdog · #8 10-03-2010, 12:51 AM

[QUOTE=LouBoyd;23686]

Quote:

Originally Posted by redtazdog

TC 44 mag 1:11 twist barrel 240 and 300 grn pills
give me 2" groups and sometimes better when I weigh each powder charge
by hand.
I use AA #7 for 240 and 300 grn sub loads, this thing is as quiet as
any of my semiauto's in 22 lr suppressed.
Making a 1:11 twist barrel for a lever gun now

Who makes a .429" bore barrel with an 11" twist?

.
http://www.douglasbarrels.net/

LouBoyd · #9 10-03-2010, 02:27 PM

[QUOTE=redtazdog;23687]

Quote:

Originally Posted by LouBoyd

http://www.douglasbarrels.net/

> "Who makes a .429" bore barrel with an 11" twist?"

Thanks, though the current Douglas website shows only 14, 16, and 36" twist and I don't see any mention that they offer custom twists.

redtazdog · #10 10-04-2010, 03:34 AM

[QUOTE=LouBoyd;23697]

Quote:

Originally Posted by redtazdog

> "Who makes a .429" bore barrel with an 11" twist?"

Thanks, though the current Douglas website shows only 14, 16, and 36" twist and I don't see any mention that they offer custom twists.

You will need to call and ask as they do a run of the faster twist every now and then but dont brag much about them because of little demand for 1:11.