Quarterbore's Forums

Quarterbore's Forums (http://www.quarterbore.net/forums/index.php)
-   Other Subsonic Topics (http://www.quarterbore.net/forums/forumdisplay.php?f=60)
-   -   44 Mag sub-sonic (http://www.quarterbore.net/forums/showthread.php?t=4322)

Fritzcat 09-20-2010 02:45 PM

44 Mag sub-sonic
 
I picked up a NEF Handy rifle in 44 Mag. Has anyone had any experience with these sub-sonic and suppressed? Barrel twist? bullet weights? charges? The barrel is 22", but if it works good with subs I can shorten it and do a Form 1 can. Any advice, would I be wasting my time. I have a 458 Socom bolt gun and waiting on my Form 1. I ran across this at a garage sale and thought I would try. What do you think?

dieselten 09-20-2010 05:00 PM

I have a 44 mag handi with barrel cut to 17" I use a AAC Evo 45 can on it. The barrel has a very slow twist, I think it is 1-38". I have tried some 240 bullets at 1050 and have had average accuracy, but that could be my gun. I would not try anything heavier due to the twist

Fritzcat 09-20-2010 07:54 PM

44 mag
 
What powder charges does it like the best?

dieselten 09-21-2010 02:36 PM

i tried trail boss but could not get enough powder into the case so i switched to unique with a good crimp. can't remember exact charge - just enough to be around 1000 fps.

redtazdog 09-24-2010 02:49 AM

TC 44 mag 1:11 twist barrel 240 and 300 grn pills
give me 2" groups and sometimes better when I weigh each powder charge
by hand.
I use AA #7 for 240 and 300 grn sub loads, this thing is as quiet as
any of my semiauto's in 22 lr suppressed.
Making a 1:11 twist barrel for a lever gun now
http://i197.photobucket.com/albums/a...integral2w.jpg

Fritzcat 09-27-2010 12:56 AM

That is a nice looking rig.

LouBoyd 10-02-2010 10:42 PM

[QUOTE=redtazdog;23546]TC 44 mag 1:11 twist barrel 240 and 300 grn pills
give me 2" groups and sometimes better when I weigh each powder charge
by hand.
I use AA #7 for 240 and 300 grn sub loads, this thing is as quiet as
any of my semiauto's in 22 lr suppressed.
Making a 1:11 twist barrel for a lever gun now


Who makes a .429" bore barrel with an 11" twist?

redtazdog 10-03-2010 12:51 AM

[QUOTE=LouBoyd;23686]
Quote:

Originally Posted by redtazdog (Post 23546)
TC 44 mag 1:11 twist barrel 240 and 300 grn pills
give me 2" groups and sometimes better when I weigh each powder charge
by hand.
I use AA #7 for 240 and 300 grn sub loads, this thing is as quiet as
any of my semiauto's in 22 lr suppressed.
Making a 1:11 twist barrel for a lever gun now


Who makes a .429" bore barrel with an 11" twist?

.
http://www.douglasbarrels.net/

LouBoyd 10-03-2010 02:27 PM

[QUOTE=redtazdog;23687]
Quote:

Originally Posted by LouBoyd (Post 23686)

> "Who makes a .429" bore barrel with an 11" twist?"

Thanks, though the current Douglas website shows only 14, 16, and 36" twist and I don't see any mention that they offer custom twists.

redtazdog 10-04-2010 03:34 AM

[QUOTE=LouBoyd;23697]
Quote:

Originally Posted by redtazdog (Post 23687)
> "Who makes a .429" bore barrel with an 11" twist?"

Thanks, though the current Douglas website shows only 14, 16, and 36" twist and I don't see any mention that they offer custom twists.

You will need to call and ask as they do a run of the faster twist every now and then but dont brag much about them because of little demand for 1:11.


All times are GMT -4. The time now is 09:39 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.