300 fireball barrels in stock!

[Scalce]

Originally Posted by TheAlmightyBob

Also to address the gas block issue some of you brought up. I have to say that mine has worked with no modification right from the start. I measured the gas hole *which is posted somewhere on here* at about .0925 - .0950. I find that this size doesnt kill you with recoil on supersonics, and is also enough to cycle subsonics. And just to throw this in there, my 147's are subsonic.

So you are using the stock gas block with both supersonic and subsonic rounds and they all cycle the action and lock back the bolt carrier everytime?

Do you shoot suppressed?

[Garrett]

Originally Posted by TheAlmightyBob

And just to throw this in there, my 147's are subsonic.

I just got one of these barrels. What powders are you using with the 147 subsonics?

[N310toN170]

Are these stainless or chrome lined?

[TheAlmightyBob]

I do shoot this barrel suppressed with the stock gas block. I havn't had any problem with it, or without it.

[Titleiiredneck]

Originally Posted by N310toN170

Are these stainless or chrome lined?

stainless threaded 5/8x24tpi

[wescus]

Can you get these barrels threaded 9/16-24?

[Titleiiredneck]

if you custom order one, but you can always get a adapter or cut and rethread

[N310toN170]

I've got mine ordered and its been about a week waiting so far... I'll post my thoughts once I have a chance to get it up and running.

In the meantime this thread has come up regarding load development specifically for the Noveske 16"...

http://www.quarterbore.net/forums/showthread.php?t=3481

If you have experience with this barrel, please post...I'm sure it will save people some valuable time.