Quote:
Originally Posted by Colohunter
As a note, I have some of these bullets that I load in a 30-30. I tried loading some dummy loads in my whisper thinking that they would be an inexpensive plinking bullet. In my AR they would not feed from the magazine. They would jam on the magazine or the feed ramps. The front meplat was a little too wide to work. Hopefully if you design a round for the Whisper specifically it would have a little more of a point to it.
|
I have a die that I might be able to RE-Strike the flat points in to make a spire point out of them. I'm going to try to hand strike them and see what I come up with. That should take care of the feeding problems in the AR platform.
Threaded Mode