NOTICE!!! This rotation of the Jig at these terms is NOW CLOSED!!!!
I have started a new thread to prepare for a 3rd Roation with different terms. If anybody wants to rent the jig and they are not on the list on Page 1 of this thread then you need to sign up in the new thread here:
http://www.quarterbore.net/forums/showthread.php?t=875
Members as listed below will get the jig as described in this thread before the 3rd Rotation starts!
--------------------------------------------------------------------------------------------------------
My
last round of renting my 555th jig just didn't work out so great and it became extremely frustrating for me because people didn't let me know when they got my tools, they don't take care of the tools when they used them, they didn't let me know when they are done, they took forever to ship them to the next person when they were done, they didn't let me know when they were shipped.... or they simply lied to me. I am very reluctant to try this again but I have had at least three people contact me to express interest in renting one of my jigs and honestly most guys where great.
The problem is still that the shipping from me plus any rent plus shipping back to me would cost a person about $56 or more (est $18 shipping w/ insurance + $20 rent + $18 to return). That is just too much money and that is why I was trying to run the rotation as I had done before so, I am going to give this ONE last try.... but before you sign up for this list:
You must agree to the following terms:
1. You will
POST IN THIS THREAD when you receive the jig.
2. You will
POST IN THIS THREAD when you are done using the jig.
3. You will pay shipping plus insurance for $200 WITH A TRACKING NUMBER.
4. You will
POST IN THIS THREAD what the tracking number is as soon as you ship.
5. You MUST subscribe to this thread or allow e-mail from the board so that I can let you know when you should pay your rent and so that you will know what is happening.
As for costs, I am going to stick with the original cost structure...
Your Rent of $20 includes The use of a DPH Arms Flat bending Jig and my grease to do upto five flats. Each extra flat after five I would like to request that an extra $0.50 be paid to help cover the additional wear on the jig. You will also be expected to then ship the jig to the next person as described above. I will try to have two people paid in advance so that the jig can keep moving...
Examples:
You Bend 1 to 5 flats - $20 + shipping to next person
You Bend 6 flats - $20 + shipping to next person + $0.50 in the box)
You Bend 20 flats - $20 + shipping to next person + $7.50 in the box (15 extra at $0.50)
You host a build party and you all do 40 flats = $20 + shipping to next person + $17.50 in the box (5 included + 35 extra at $0.50/each)
Now, if you have someone over to use the jig or two people on the list live close to each other... you can build together or share the tools... all I ask is that you POST WHAT IS HAPPENING HERE and be aware that the person that is signed up here is responsible for my tools.
I will maintain a list here of who is on this list and where the jig is at based on the posts THAT YOU MAKE BELOW telling EVERYBODY where the jig is at....
So, please post below if you want on this list and your post asigns you your position in the line...
Jig Rotation List (Status)
2. mwebster
- IM sent via forums to Pay 8-Sep-2005
- PAID 9-Sept-2005 (Webster)
- Jig Shipped 9-9-2005 Tracking Number 1Z5AR53203000083448
- Should receive jig on 19-Sept-2005
- Jig received 19-Sept Finished 19-Sept
- Address for Darknight provided 19-Sept
3. Lanceman
- IM Sent via forums to send payment 19-Sept-2005
- Paid 20-Sept-2005 (49R912126H8580411)
- Will receive jig from mwebster
- Received jig 9-23-05
Jig returned to Quarterbore because of problems with the jig.
5. bigsexy408
- Requested Rent 27-Sept-2005
- Paid 28-Sept (rodriguez)
- Jig shipped from Quarterbore on 10/19 2005 Tracking Number 1Z5AR4350300076354
- Notified QB that he is done 10-30-05
6. KillJoy149
- IM sent via forums to Pay 30-Oct-2005
- Address provided to bigsexy408 1-Nov-2005
7. tuolumnejim
- asked to pay 11-06-2005
- payment received Nov-07-2005 (Martinez)
- Received jig frolm Killjoy 11-18-2005
- mondtster 's address provided 11-21-2005
8. mondtster
- Paid 11-20-2005 (Mondt in Sioux Falls, SD)
- Will be getting jig from tuolumnejim
- Sent DarkKnights address Dec 6, 2005
1. DarkKnight (Asked to Pay)
- IM sent via forums to Pay 8-Sep-2005
- PAID 9-9-2005 (Cho)
- dropped in line by request (waiting on press)
- IM sent 10-30-05 asking if ready to use jig
- Dropped in line again by request 11-01-05
- IM sent 11-06-05 asking if ready to use jig
- Dropped in line again by QB Nov-08-2005
- Dropped in line again 11-21-2005
- Received jig 12-11-2005
- Address for myco4you provided by QB 12/17/2005
9. myco4you
- Asked to pay rent Dec 11, 2005
- Sending Money Order
- Money order received 12/17/2005 - address provided above
- Done with the jig 27-Dec-2005 dodge15's address provided
10. dodge15
- Asked to pay Dec 15, 2005
- Paid PayPal Dec 18, 2005 (Davenport on LA)
- Address provided to above 27-Dec-2005
- Received jig 7-Jan-2006
- Done with jig 26-Jan-2006
- Address for mk1271 provided 27-Jan-2006
GREAT NEWS!!! I got the third DPH jig and it will be put into circulation as soon as I can find a good shipping box, wrenches, and more grease...
11. boatdoc
- Asked to pay 12-27-2005
- E-mail reminder sent 2-Jan-2006 (Will be deleted from list in 1-week)
- Dropped from the list by request 1-Jan-2006
12. Wrangler
- Asked to pay 12-27-2005
- Does not need the jig made his own!
14. fuzzy_dba
- Asked to pay 2-Jan-2006
- PAID 2-Jan-2006 T Shores
- Will get Jig #2 First (Shipping 15-Jan-2006)
- Jig shipped 16-Jan-2006
- Jig Delivered 1-18-2006
- Done with Jig 1-27-2006
- Yankeefan's Address provided 1-27-2006
-
15. mk1271 (Wants to pay via Money Order)
- PAID
- Willl be getting jig from dodge15
- Address provided to dodge15 on 26-Jan-2006
- Received jig 01-31-2006
- Done with jig 2-11-2006
- Address of theflatfoot provided 2-11-06
16. Yankeefan
- Asked to pay 15-Jan-2006
- Paid 16-Jan-2006 (Perkins)
- Address provided to fuzzy_dba 1-27-2006
- Will be getting Jig #2
- Jig received Feb 6 -2006
- Done with jig 2-Mar-2006
- Provded address for mondtster on 2-Mar-2006
17. theflatfoot
- Asked to pay 15-Jan-2006
- Paid 16-Jan-2006 (Satterfield)
- Will be getting the jig from mk1271
- Done with the jig 24-Feb-2006
- Tala's address provided 24-Feb-2006
18. Tala
- Asked to pay 1-30-2006
- Paid 2-1-2006 (Doesn't want the jig before 2-12!)
- Will be getting Jig #1 from theflatfoot
- Done with the Jig 4-Mar-2006
- RETURNING JIG #1 to QUARTERBORE for Inspection (TALA was Member #10 to use the jig)
19. mondtster
- Asked to pay (2nd use) 13-Feb-2006
- Payment received 13-Feb-2006
- Will be getting Jig #2 from Yankeefan
- Address provided 2-Mar-2006
20. d.hauser
- Paid 3-Mar-2006 (Hauser)
- Received Jig 30-Mar-2006
- Done with jig 13-Apr-2006
- Going to replace bolts & expects to ship jig Apr 17th
- Oldmanpaintball's address provided 13-Apr-2006
21. mightyt11
- Paid 3-Mar-2006 (Marrero)
- Quarterbore shipped Jig on 3-Apr-2006 (UPS Tracking 1Z5AR4350300573316)
- Jig delivered 6-Apr-2006
- Done 15-Apr-2006
- Provided with ixtow's name and address 15-Apr-2006
23. Oldmanpaintball
- Payment Requested 6-Apr-2006
- payment received 11-Apr (Benson)
- Will be getting jig from d.hauser
24. ixtow
- Payment mailed 3-Mar-2006
- payment received (Date uncertain)
- Will be getting jig from mightyt11
- done with the jig 1-May-2006 coaldogie's address provided 1-May-2006
25. coaldogie
- Payment Requested 7-Apr-2006
- Money Order received (Note to self - address in PM box)
- Will get jig #1 from ixtow
- Shipped 2-May-2006
- Indicated he will be done May 16th
- Address of ShuckersFan provided May 14th
26. ShuckersFan
- Payment Requested 23-Apr-2006
- Payment received 24-Apr-2006 (Plambeck)
- Will be getting Jig #1 from coaldogie
Quote:
Following have been removed from list:
4. phoenix01 - REMOVED FROM LIST BY QB
22. Linear Thinker - by request
13. bigsexy408 (again)
- Asked to pay 12-28-2005
- Dropped one place in line by request 2-Jan-2006
- Asked to pay again 15-Jan-2006
- Dropped from list for no payment and no replies
22. dodge15 (again ;) )
- Purchased his own jig
|
Following are some links to help with bending your flats:
Very Good Write up by AK-Builder.com
Threaded Mode
