|
Dillon Rapid trim
Got my Dillon Rapid Trim today and Dillon 308 trim die. I cut the trim die 0.6" like the info I've seen posted and the Youtube video. Looks like I'll have to try a C-H die. To get to 1.355" case length I had to cut the die down a little farther. Then to avoid pushing the shoulder back too far, I had to adjust the trimmer down and let it cut into the trim die a few thousands. I can get to 1.355" case length now but, the trim die is adjusted down so far the suction holes in the trim die are srewed almost all the way into the tool head. Dillon 550 by the way.
Anyone else try a Dillon trimmer on a 550 to make Whisper brass?
|
Threaded Mode