Brass Services / For Sale

[Hoser]

I have had a few people asking me about me making 300/221/Whisper/Blackout brass as I have a Dillon 1050 all set up for it.

I can and am willing to do it.

Please keep in mind that there are many flavors of the 300 Whisper/Blackout out there. I do all the heavy lifting for you, I trim it to 1.355 and take care of the primer pocket crimp. With some chambers you can just add a primer, powder, bullet and you are good to go. Other chambers you might have to run the brass through a full length resize die. I strongly recommend doing it anyway, but that is just me. I even full length resize all brass, virgin or not. I would rather ship brass that needs the shoulder pushed back a couple thousandths than send you overworked brass that will cause headspace issues and short brass life.

If you send me your once fired and cleaned 223 brass, I will deprime it, swage out any primer crimp, cut it back to 1.355 and tumble it 100% clean again. You get your brass back.

.10 each

If you want me to touch up the neck on a Giruad trimmer, it will cut a slight VLD type chamfer and completely deburr the case. This is not needed as the Dillon run at 4,000 rpm and cuts really clean, but it leaves a square edge. The Giruad will make it perfect. If you want it run through the Giruad, add .04 each. Depending on how much brass I have to process, I should be able to turn your brass in around 5-7 days.

I can also anneal brass on my Giraud annealer. Annealing is one of those cant hurt might help kind of things. Add .02 each.

I will ship it back via USPS flat rate with signature confirmation.

References avail.

[strycnine]

PM sent.

[Hoser]

Originally Posted by strycnine

PM sent.

Back at you.

[rabagley]

Sorry it took me so long to get the loads up and get out to the range (this is about the brass you sold me back in October), but I was out last night and that brass you made is amazing! I got my narrowest spread on velocity from any round I've loaded for any firearm.

12fps across 10 rounds with your brass, CCI BR-4 primers, 8.50gr H110, and 240gr SMK's. I didn't believe the spread after 5 (10fps spread), so loaded and shot a second 5 at the range and the total spread was 12fps for all 10. Downrange accuracy was similarly fantastic. I was only shooting at 50 yards (just doing chrono testing), but they were going in one hole.

I have clearly found the subsonic load for my AR.

Thanks again for the offer, the great price, and the fantastic brass!

Ross

[martineta]

PM sent regarding Whisper brass cutting to length from 223 brass.

[Hoser]

I am back stateside and making brass again.

All PMs replied to.

[thehouseproduct]

Did you make a custom trim die?

[Garrett]

Tag - so I can find this thread later.

[jacack]

Just wanted to give some feedback, I sent 200pcs of Lake City to Hoser, I got my brass back in less than a weeks time from when he recived it and it looks great, I checked a few and they are all perfect, clean, cut square and all the same lenght. He should charge more as the shipping for him to return the brass to me was $5 and change and he only charged me 20.00 for 200pcs anyone that doesnt give this guy some business must love brass work( personaly I would rather be shooting) again i highly recomend his services and will use him again and hope some of you do too.

Jared Costa

[Hoser]

Just to let you guys know I am still making chips.