Loaded ammo pics........

[strycnine]

Anybody got pics of their loaded subsonic ammo? If so, can you post a few?

[Alleycat]

[strycnine]

Originally Posted by Alleycat

Thanks for posting the pics


What grain are the .300's?

[Just Call Me...G]

Hi,

Long time lurker, first-time poster and fan of the .300 Whisper
Am coming to the final stages of my personal project.

Pics submitted are of the loads that I am currently evaluating for velocity & function in my .300 Whisper AR (formerly an ArmaLite M-15 20" flat-top). I purchased a 16" barrel from JT Distributing/DoubleStar and had a local AR smith do the work, added an MGI adjustable gas tube and a few other items to make it more functional to my needs. Also posting pic of rifle :-)

I did break the cherry on it with my initial loads of Nosler 125gr. Ballistic Tips and so far am very happy with accuracy and function.


Left-to-Right:

125gr. Nosler Ballistic Tip - Supersonic
RCBS 130gr. cast Spire Point - Supersonic
Speer 130gr. Soft Point - Supersonic
Lee 155gr. cast Spire Point - Supersonic
Remington 150gr. Soft Point - Supersonic
Pull-Down Mil-Surp 150gr. FMJBT - Supersonic

Sierra Match King 190gr. HPBT - Subsonic
Hornady 190gr. Soft Point - Subsonic
(I am loading these with 14.0gr of Reloder 7 & will chrony/eval this weekend)
Eventually will be purchasing a suppressor for this rifle.


Keep The High Ground,

G

[strycnine]

Originally Posted by Just Call Me...G

Hi,

Long time lurker, first-time poster and fan of the .300 Whisper
Am coming to the final stages of my personal project.

Pics submitted are of the loads that I am currently evaluating for velocity & function in my .300 Whisper AR (formerly an ArmaLite M-15 20" flat-top). I purchased a 16" barrel from JT Distributing/DoubleStar and had a local AR smith do the work, added an MGI adjustable gas tube and a few other items to make it more functional to my needs. Also posting pic of rifle :-)

I did break the cherry on it with my initial loads of Nosler 125gr. Ballistic Tips and so far am very happy with accuracy and function.


Left-to-Right:

125gr. Nosler Ballistic Tip - Supersonic
RCBS 130gr. cast Spire Point - Supersonic
Speer 130gr. Soft Point - Supersonic
Lee 155gr. cast Spire Point - Supersonic
Remington 150gr. Soft Point - Supersonic
Pull-Down Mil-Surp 150gr. FMJBT - Supersonic

Sierra Match King 190gr. HPBT - Subsonic
Hornady 190gr. Soft Point - Subsonic
(I am loading these with 14.0gr of Reloder 7 & will chrony/eval this weekend)
Eventually will be purchasing a suppressor for this rifle.


Keep The High Ground,

G

Looks like you've been busy! Nice setup.........

[Just Call Me...G]

LOL!
Yes I have...this project has been about 4 years in the making.

A friend of mine e-mailed me feistyrooster's .300 FireBall page one day and I sorta got hooked.

(http://www.feistyrooster.com/300x221/300x221index.html)

Don't get me wrong I love my ARs in 5.56, but deep down inside I will always be a .30 cal kinda guy. I was raised on .30 caliber firearms and fondly remember taking my first deer with my father's old Winchester 94 in .30-30 as well as hunting for Louisiana wild pigs with his Remington Woodsmaster in .30-'06.

This was the perfect set up for me, a .30 cal AR with punch in supersonic (out here in NV I want to use it for coyotes), as well as heavy grain bullets for subsonic use. The fact that it just required me to re-barrel one of my ARs and I could use existing AR mags/accessories and I have plenty of .30 cal rifles that I am already loading for just made it that much more fun.

I did a ton of research and then went about gathering all the goodies I would need. In particular I was very fortunate to have acquired a 5 gallon bucket full of once-fired 5.56/.223 brass. I'm glad because I am a prolific reloader and did not want to dip into my 5.56 brass for this project.

Plus during that time I also started casting my own bullets...again I happened to have been fortunate enough to inherit almost 500lbs of wheelweights. I am really looking forward to shooting my own homemade projectiles through my own reloaded ammo.

This forum in particular has provided a wealth of information and there are some really knowledgeable people on here, I am grateful to all of the members here.

It's been a long road and I have had a great time doing the build on my AR and turning all of that 5.56 brass into .300 Whisper brass (2200 rounds!).
I am definitely looking forward to making all of that brass into ammo.


Within the next few weeks all of the research will be done and I plan on using the rifle for coyote shooting, hunting and an all-around fun gun. In the future, I'd really like to take deer and hog with the .300 Whisper


G

[Alleycat]

225 Outlaw ----250 Hawk------240 SMK All Sub