WTS FAL receiver wrenches and barrel vises
 

Receiver wrenches and barrel vises for sale.
ALL TOOLS IN STOCK ! ! !
All prices include shipping via USPS Priority Mail.
Approximately 3.4% added for PayPal:

Receiver Wrench:
check/MO $60
PayPal $62

Barrel Vise:
check/MO $61
PayPal $63

Wrench and Vise:
check/MO $114,
PayPal $118

Wrench fits all known metric receivers. Some inch receivers will require minor fitting.
Barrel vise fits standard profile barrels, inch and metric.

Payment options:
- Cashier's check or money order (preferred)
- PayPal to rackley@mstar2.net
- Personal check (requires two-week wait before shipping. )

Please mail to:

Glenn Rackley
12208 Glen Canyon Rd. NE
Albuquerque, NM 87111

When ordering, please remember to include your shipping and e-mail addresses.
For questions or comments, please e-mail me at rackley@mstar2.net

The profile of these wrenches accomodates the small boss on the bottom of the Dan Coonan receivers. These

were designed to be used with either 3/4 or 1/2-inch breaker bars, plus they include two thru-holes for

attachment of a home-made handle, or for bolting to a work bench. Firmly fixed to a work bench, the

open-end wrench method may be used for barrel installation without the need for a large bench vise.

These wrenches have slots in the top half. It makes the fit of the wrench to the receiver more flexible

and universal.

They are made from high-carbon hot-rolled steel. Available only in the white. Purchasers will want

to add some type of protective finish: cold blue, paint, park, etc. I keep the cost down by not adding a

finish.

http://chilirat.com/FAL_tools/wrench_improved.jpg

http://chilirat.com/FAL_tools/vise_1_post.jpg

http://chilirat.com/FAL_tools/vise_2_post.jpg

http://chilirat.com/FAL_tools/vise_3_post.jpg

The following thread shows a test of the aluminum barrel vise:
Barrel vise test

NOTE: Marketplace feedback is appreciated. Thanks. http://chilirat.com/emoticons/chilirat.gif