ratas calientes
07-21-2007, 02:52 PM
Receiver wrenches and barrel vises for sale.
ALL TOOLS IN STOCK ! ! !
All prices include shipping via USPS Priority Mail.
Approximately 3.4% added for PayPal:
Receiver Wrench:
check/MO $60
PayPal $62
Barrel Vise:
check/MO $61
PayPal $63
Wrench and Vise:
check/MO $114,
PayPal $118
Wrench fits all known metric receivers. Some inch receivers will require minor fitting.
Barrel vise fits standard profile barrels, inch and metric.
Payment options:
- Cashier's check or money order (preferred)
- PayPal to rackley@mstar2.net
- Personal check (requires two-week wait before shipping. )
Please mail to:
Glenn Rackley
12208 Glen Canyon Rd. NE
Albuquerque, NM 87111
When ordering, please remember to include your shipping and e-mail addresses.
For questions or comments, please e-mail me at rackley@mstar2.net
The profile of these wrenches accomodates the small boss on the bottom of the Dan Coonan receivers. These
were designed to be used with either 3/4 or 1/2-inch breaker bars, plus they include two thru-holes for
attachment of a home-made handle, or for bolting to a work bench. Firmly fixed to a work bench, the
open-end wrench method may be used for barrel installation without the need for a large bench vise.
These wrenches have slots in the top half. It makes the fit of the wrench to the receiver more flexible
and universal.
They are made from high-carbon hot-rolled steel. Available only in the white. Purchasers will want
to add some type of protective finish: cold blue, paint, park, etc. I keep the cost down by not adding a
finish.
http://chilirat.com/FAL_tools/wrench_improved.jpg
http://chilirat.com/FAL_tools/vise_1_post.jpg
http://chilirat.com/FAL_tools/vise_2_post.jpg
http://chilirat.com/FAL_tools/vise_3_post.jpg
The following thread shows a test of the aluminum barrel vise:
Barrel vise test (http://www.falfiles.com/forums/showthread.php?s=&threadid=115235)
NOTE: Marketplace feedback is appreciated. Thanks. http://chilirat.com/emoticons/chilirat.gif
ALL TOOLS IN STOCK ! ! !
All prices include shipping via USPS Priority Mail.
Approximately 3.4% added for PayPal:
Receiver Wrench:
check/MO $60
PayPal $62
Barrel Vise:
check/MO $61
PayPal $63
Wrench and Vise:
check/MO $114,
PayPal $118
Wrench fits all known metric receivers. Some inch receivers will require minor fitting.
Barrel vise fits standard profile barrels, inch and metric.
Payment options:
- Cashier's check or money order (preferred)
- PayPal to rackley@mstar2.net
- Personal check (requires two-week wait before shipping. )
Please mail to:
Glenn Rackley
12208 Glen Canyon Rd. NE
Albuquerque, NM 87111
When ordering, please remember to include your shipping and e-mail addresses.
For questions or comments, please e-mail me at rackley@mstar2.net
The profile of these wrenches accomodates the small boss on the bottom of the Dan Coonan receivers. These
were designed to be used with either 3/4 or 1/2-inch breaker bars, plus they include two thru-holes for
attachment of a home-made handle, or for bolting to a work bench. Firmly fixed to a work bench, the
open-end wrench method may be used for barrel installation without the need for a large bench vise.
These wrenches have slots in the top half. It makes the fit of the wrench to the receiver more flexible
and universal.
They are made from high-carbon hot-rolled steel. Available only in the white. Purchasers will want
to add some type of protective finish: cold blue, paint, park, etc. I keep the cost down by not adding a
finish.
http://chilirat.com/FAL_tools/wrench_improved.jpg
http://chilirat.com/FAL_tools/vise_1_post.jpg
http://chilirat.com/FAL_tools/vise_2_post.jpg
http://chilirat.com/FAL_tools/vise_3_post.jpg
The following thread shows a test of the aluminum barrel vise:
Barrel vise test (http://www.falfiles.com/forums/showthread.php?s=&threadid=115235)
NOTE: Marketplace feedback is appreciated. Thanks. http://chilirat.com/emoticons/chilirat.gif