Quarterbore.Net Forums


Go Back   Quarterbore's Forums > 300 Whisper Forums > 300 Whisper Ammo and Reloading
Home Forums Classifieds Photo Server FAQ Members List Calendar Search Today's Posts Mark Forums Read

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 10-07-2008, 03:21 PM
MadDog MadDog is offline
Junior Member
 
Join Date: Jan 2008
Posts: 20
220gr SMKs not stabilizing.**Udate in original post.**

Well, I tried some more loads. Some 220gr SMKs at around 1100 fps, Some 220gr round nose at about 1025, and some 240gr SMKs at around 1140 fps. None were stabilized at 100 yards. I did try some 190gr SMKs at around 1020fps that did stabilize and the accuracy was much better. I still don't know why the longer bullets will not stabilize out of my 1 in 8 twist barrel.

One issue that I noticed that may or may not be related. When I cleaned the upper the first time, I noticed a lot of small copper particles on the bolt and inside the carrier. This time when I cleaned it, there were no particles of copper but there is a considerable build up of copper on the bolt and inside the carrier. I will attach some pictures below. The barrel itself is cleaning up very easily with very little copper.

I have never seen that type of build up on my 223 uppers. Is this common with subsonic loads? I am shooting suppressed if that matters.

Any ideas?






--------------------------------------------------------------
Looking for some advice- what would you do next?

I purchased a new 300 Whisper upper several months ago and just finally found time to start loading for it. After reading my manuals and posts here and on other sites, I decided on a couple of starting loads. My goal was to get 220 gr SMKs as fast as possible but still be subsonic. My barrel is 10" and has 1 in 8 twist.

I took the rifle out today and tried out several loads. None of them stabilized very well. I was pretty disapointed. I really thought that the 1 in 8 twist barrel would handle the 220gr SMKs without any problem. I will add a couple pictures of targets that include the load and speed of the rounds fired. As you can see the accuracy was pretty poor also. Since I am using a suppressor, I tried some of these at short range without the suppressor and they appeared stable at about 10 yards. Also I tried some at 100 yards without the suppressor and they were the same as the groups pictured.

Shouldn't they be stable at these speeds in a 1 in 8 twist? I could go a little faster but they were pretty close to being super sonic already.

Any suggestions besides trying different bullets?

Thanks,

Joe








Last edited by MadDog; 11-05-2008 at 02:50 PM.
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:17 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.