RLL in a Stag Rcvr?

[FontanaHorseman]

Also on cntrailriders mods to Stag receiver:

I did the same thing and it works fine with one caveat...if you use the RLL protector you will have to mill the lower deck down to .630 or the link will bind.

I am in the process of doing that with a dremel using different cutting heads and it is working fine.

After I test I will post back here but I see no reason it will not work, just takes a little time to do the cuts but you can do it without a lathe/mill.

YMMV, FH