RLL in a Stag Rcvr?

[cntrailrider]

Your Welcome, PrebanCOLT -

Now here's that video I promised. First time using a remote to video myself, and only had one BETA left. You'll see ejected casings move the camera.

http://media.putfile.com/RLL-with-ho...elect-fire-mod

Thanks Quarterbore, for posting the info to get this gizmo working. Couldn't afford a DIAS, but I still arrived! This is my only F/A AR-type firearm. Have a DPMS HBAR with a XXX suppressor, and that's also become a real addiction - I think EVERYONE oughta be out with their night-vision scope, quietly blowing cans away in the dark. We're doing 200 yards w/ a 1st Gen and learning how far we can push it. It's good for the mind, and besides, its the right thing to do.

Has anyone got their "Plan B" select-fire mod working? I'm trying it too, but have some bugs to work out. The up / down cam action with the selector is really slick. But getting the link to slip FORWARD & up, out of the 'new' D/C notch, and into the standard RLL F/A position has me confounded. Hopefully someone here shares how they got theirs working. I'd prefer not adding a spring

Have a good one - I AM

Steve in EL Paso

PS Went back out and shot another short vid http://media.putfile.com/RLL-One-Mag

[FontanaHorseman]

I am curious about "Plan B" and thought about the problem listed above getting the link out of the cut.

Has anyone worked something out???

Thanks, FH

[FontanaHorseman]

Also on cntrailriders mods to Stag receiver:

I did the same thing and it works fine with one caveat...if you use the RLL protector you will have to mill the lower deck down to .630 or the link will bind.

I am in the process of doing that with a dremel using different cutting heads and it is working fine.

After I test I will post back here but I see no reason it will not work, just takes a little time to do the cuts but you can do it without a lathe/mill.

YMMV, FH

[cntrailrider]

On 'Plan B' - I understand it, and I tried it, and get this......

When the selector is on F/A, it's semi

When the selector is on Semi, it's F/A



Nor can I get it to function reliably, even in it's 'backwards condition'. Obviously something in there isn't working right. When it's apart, the selector will lower and (with some fidgeting) raise the link, as intended. I am confounded.

I wish I had a plastic window in my lower, so I could see what's going on in there when it's together

OK you guys can stop laughing now....

I believe someone's going to figure out 'plan B' and eventually it may be me. That sure would be a feeling of accomplishment

Steve in EL Paso

[FontanaHorseman]

Originally Posted by cntrailrider

I wish I had a plastic window in my lower, so I could see what's going on in there when it's together when it's together

OK you guys can stop laughing now....

Steve in EL Paso

Not laughing - wished the same think myself many times!
FH