300 Whisper Brass For Sale !!

[keith__davis]

I have 300 whisper/300 fireball/300-221 brass that is made from .223 brass that has been trimmed to the true 300 whisper length of 1.35 to function is all guns. Once trimmed I than size in true 300 whisper dies, de-caped, swaged if needed and polished to a high luster. I can prime it for you to (Winchester primers). With it primed all you have to do is add powder and seat a bullet, doing this for you single stage press guys out there, I have been there. I shoot this in my bolt, single shot, semi and full auto guns (Form-4) and it functions great. I use once fired commercial brass from a large police dept. At the moment I have federal brass that does have a crimped primer pocket but I do swage it all before shipping. With the many different configurations of guns out there please feel free to request a free sample. I do this often my way of ensuring you’re happy. Need a special trim length no problem, I have trimmed it as short as 1.2 for a guy to make 9mm blanks to as long as 1.41 for a special cut camber. I take money orders, checks or paypal (paypal address: keith__davis@yahoo.com) Also if you worried about availability, I’m an unlimited source. I have been making this for years and see no limit in sight, have about 50,000 rounds of brass on hand at any given time. Most orders are shipped within 24hrs however. I only do this part time so with that, large orders will be shipped on the following Monday for I will need the weekend to work on it. As to date I have had my brass fired in Model 1 Sales, Double Star, Olympic Arms, Hesse Guns, AR15Barrels.com, Thompson & Centers Contender and Encore, and custom guns made with Clymer, PTG, Dave Mason reamers with no troubles. NOTE: SSK Inc (JD Jones) guns have a very tight camber and to date this is the only guns I have had trouble with. Brass for these guns requires special neck reaming (working on it, ready in about a week or two). Thanks for your time.

1000 to your door 130.00
500 to your door 80.00
1000 primed to your door 155.00
500 primed to your door 90.00

I ship via US post office priority mail flat rate. I can ship other carriers but additional charges may apply.

Have any questions??: keith__davis@yahoo.com

David Davis
3597 Sweethome Rd.
Ashland City, Tn 37015


P.S. You get this brass with the understanding that if your not 110% happy I will refund your money. After 310,000 rounds and counting I have had only three problems and these were based on trim length and neck thickness, but in the end they were happy and that’s my goal.

[tp555]

Have you had any problems with the necks of the brass breaking off? I made my own batch from 223 mil brass.After about 5 reloads the necks separated at the
case wall to neck bend. It was easy to remove with a brush from the chamber. I thought this was because the once fired brass was hardened and annealing the neck area would solve this. brass was lc marked.I use rem 221 new brass now
and it is way soft the first time. Chamber is from a clymer 30/221 reamer which
I have used for years.regards.

[dpd70183]

Beware of Mr. Davis! He's at it again with taking money for 300/221 brass and not delivering them. I paid him $210 for 1000 cases and its been over a month and no brass. I talked with him and his wife on the phone. They say the brass is about to be shipped, or has been shipped, yet I don't receive it.

He doesn't answer his e-mails. All I want is my money back. I don't believe anything this guy has to say. I filed a complaint with PayPal. I kept all my e-mails and challenge Mr. Davis to prove what I am saying is not the truth.

But he'll come up with some excuse about something. The bottom line is you just can't take money and refuse to communicate or follow through. I think in many circles they call this THEFT.