Quarterbore.Net Forums


Go Back   Quarterbore's Forums > 300 Whisper Forums > 300 Whisper Ammo and Reloading
Home Forums Classifieds Photo Server FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 12-12-2010, 07:57 PM
rv10flyer rv10flyer is offline
Junior Member
 
Join Date: Sep 2009
Posts: 14
208 AMAX and VV N110 Load Data?

Does anyone have any 300 "Whisper" load data utilizing the 208 grain AMAX and VV N110 that they would be willing to share?

Thanks in advance.
Reply With Quote
  #2  
Old 12-12-2010, 10:58 PM
snipecatcher snipecatcher is offline
Senior Member
 
Join Date: Jul 2009
Posts: 177
I use 8.5 grains in an 18" bolt gun. Load up 9.5 grains, chrono, and go from there.
Reply With Quote
  #3  
Old 12-12-2010, 11:03 PM
Spook's Avatar
Spook Spook is offline
Senior Member
 
Join Date: Aug 2005
Posts: 499
I'm real close to 9.5 in a 16" bolt gun...
Reply With Quote
  #4  
Old 12-13-2010, 05:15 PM
glocker17 glocker17 is offline
Junior Member
 
Join Date: Jun 2010
Posts: 20
I am at 8.9 gr in a 16" bolt gun.
Reply With Quote
  #5  
Old 12-13-2010, 09:43 PM
rv10flyer rv10flyer is offline
Junior Member
 
Join Date: Sep 2009
Posts: 14
Thanks for the responses. What C.O.L. are you seating the projectiles to? The 208’s I measured are about .020 longer than the SMK 220’s. I’m more limited by the magazine than some of you running bolt guns. My plan was to load up a batch of 5 rounds each from 9.0 to 10.0 grains in .2 grain increments and with a C.O.L. of 2.260”. Based on your loads listed here I might go down to 8.6 just so I have them in case I get down to 9.0 and am still in the supersonic range. I have to drive a ways to the range so I want to have a good sampling to get close to my goal.


P.S. I am running a 10.5” 1x8 barrel on an AR-15 with a 762SD (not using can while testing loads).
Reply With Quote
  #6  
Old 12-14-2010, 12:47 AM
snipecatcher snipecatcher is offline
Senior Member
 
Join Date: Jul 2009
Posts: 177
Just used my fancy new Mitutoyo micrometer for the first time and my OAL is about 2.335".
Reply With Quote
  #7  
Old 12-15-2010, 01:20 PM
coldbeerchief coldbeerchief is offline
Junior Member
 
Join Date: Aug 2009
Posts: 18
I couldn't get V N110 and 208 A-Maxs to work together - big groups.

I ended up with 8.0 gr of Lil Gun, 2.320" COAL that shoots consistently 1/3 - 1/2 MOA out of my 16" McGowen Savage
Reply With Quote
  #8  
Old 12-17-2010, 10:56 PM
lou400a lou400a is offline
Junior Member
 
Join Date: Jun 2009
Posts: 21
8.4 gr of lil'gun @ 2.220 out of 16" ar w/shillen match. I'll do 1/2 moa if I do my part
Reply With Quote
  #9  
Old 02-20-2011, 05:01 PM
rv10flyer rv10flyer is offline
Junior Member
 
Join Date: Sep 2009
Posts: 14
I wanted to update this post with a few data points I have collected so far. I am shooting an AR-15 with a 10.5” carbon barrel from Paladin, 1x8 twist, 3-way gas block, AAC 762-SD (not used during data collection below).

C.O.L = 2.245
208 A-Max
VV N110

Grains Avg Velocity StdDev
10 1283 4
9.8 1244 12
9.6 1220 12
9.4 1220 7
9.2 1186 7
9 1163 21
8.8 1137 28
8.6 1103 32
8.4 1078 8
8.2 1062 5
8.1 1030 15
8 1013 10

All of the above loads cycled perfectly and locked the bolt back after each 5 round bracket. During testing I had a target at about 10 yards for stability testing. I shot one five shot string at 50 yards and all five shots were touching. I'll test for acuracy further out next time but so far I am pleased.

Thanks for the suggestions.

Reply With Quote
  #10  
Old 02-20-2011, 05:36 PM
i8asquirrel i8asquirrel is offline
Senior Member
 
Join Date: Jul 2010
Location: oregon
Posts: 198
Great looking weapon , thanks for sharing info!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:35 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.