Quarterbore.Net Forums


Go Back   Quarterbore's Forums > 300 Whisper Forums > 300 Whisper Rifles and Pistols
Home Forums Classifieds Photo Server FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 02-19-2010, 03:14 PM
rc10j1 rc10j1 is offline
Junior Member
 
Join Date: Feb 2010
Posts: 4
Bolt gun vs AR quiet factor

I am very interested in building my first 300 whisper. I have built several AR's and would love to do one in this caliber. My question is how much louder is the AR than the bolt gun? I know there will be noise from the action cycling. Would turning the gas block off so it functioned as a single shot using the charging handle to chamber rounds make it as quiet as a bolt gun or is it still considerably louder? Thanks for the help. I am looking forward to owning my first 300 whisper!
Reply With Quote
  #2  
Old 02-22-2010, 08:00 AM
Glocksecure Glocksecure is offline
Junior Member
 
Join Date: Nov 2009
Location: SC
Posts: 5
My AR is louder than my suppressed 10/22, but not by much. It is still quieter than a paintball gun. Then again I am launching a 220 gr bullet vs 38 gr.
Reply With Quote
  #3  
Old 02-22-2010, 12:07 PM
LouBoyd LouBoyd is offline
Senior Member
 
Join Date: Aug 2008
Location: Patagonia Mountains, Arizona
Posts: 231
quiet factor.

rc10j1 Are you asking about a suppressed or unsuppressed 300 Whisper? You didn't mention a suppressor in your post. Glocsecure's answer was obviously referring to a suppressed AR-15 300 Whisper. A 16" barrel subsonic 300 Whisper without a suppressor is still going to be quite loud and you'll still need hearing protection. Unsuppressed it won't make much difference whether it's a AR-15 or a bolt action. Muzzle blast will be the only noise you notice near the shooters location. Although the bullet is subsonic from the barrel of a 300 Whisper the propellant gases are still supersonic and will produce a supersonic shockwave 20 to 30 decibels above other sounds.

With a sufficiently long barrel and a cartridge with a small case capacity it's possible to get the propellant gas and the bullet subsonic. A 22LR shooting Aguila 60 grain subsonic ammo in 24" or longer barrel will accomplish that. So will some small capacity large bore cartridges in very long barrel rifles. Generally these need to shoot cast lead as the bore friction is too high to use jacked or solids for that application. They still aren't as quiet as a good suppressor but can be shot safely without hearing protection.

My point is that without a suppressor you will not be impressed by how quiet a 300 Whisper rifle is whether it's an AR or bolt action. The muzzle blast can easily be heard at 500+ yards in a quite area. In the US adding a suppressor requires ATF registration including a $200 tax and is not legal at all in some states. There are other threads and other web sites which discuss the legal requirements.

For a suppressed rifle you can get the noise down to the level where the shooter will only notice the action noise and the thump of the bullet on some targets. For a bystander along the trajectory there will still be bullet noise in the form of a hiss or buzz. Bullet noise will be easily noticeable but hard to tell it's direction. The noise of a 1000 fps subsonic bullet is about 40 db below that of a supersonic bullet. That's independent of how well the muzzle blast is suppressed.



Action noise can be significant but the distance it can be heard depends moslty on the background noise level. The range of human hearing (threshold of detection to threshold of pain) is over 100 decibels. Making a rifle shot completely inaudible in a quite environment just doesn't happen. The best suppressors only give around 40 decibels (1 part in 10,000 sound energy). Hearing protectors cannot achieve 40 db because sound goes though the skull and sinuses bypassing muffs or plugs.

Last edited by LouBoyd; 02-22-2010 at 01:02 PM.
Reply With Quote
  #4  
Old 02-25-2010, 02:11 PM
rc10j1 rc10j1 is offline
Junior Member
 
Join Date: Feb 2010
Posts: 4
I was planning on using a suppressor. My question was if I had the gas block turned off would the AR's action be louder than the bolt gun or about the same?
Reply With Quote
  #5  
Old 02-25-2010, 08:37 PM
Alleycat's Avatar
Alleycat Alleycat is offline
Senior Member
 
Join Date: Nov 2007
Location: Columbia, TN
Posts: 364
This is my opinion (because I have never tested this), but if you have the same length barrel, same suppressor, same cartridge, and all are single shot they should sound the same. You will have differences. Exposed hammers will produce more noise than an Etronics 700. Your AR may have a gas block that leeks a little. I think within reason a 16 inch barrel with a cyclone on it will sound the same regardless of how the breach is sealed. I would love to see someone with a turn bolt and an AR test this. Any one have both and a $5,000 calibrated DB meter?
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:08 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.