Which Handguard / Rail for 300 Fireball SBR?

[azsugarbear]

I'm in the process of putting together a 300 in an AR15 platform. It will be an SBR with a 10.5" barrel. The gas block will be an adjustable .75 from tp555 in the pistol position. I want something relatively inexpensive (Daniel Defense is nice - but out for now). Something that will come just in front of the gas block, but still allow me access to it from the side. Any ideas? I know there are at least a few of you who have already encountered and solved this problem to your satisfaction.

[mstarling]

The YHM light rail will fit over the block and puts an open port over the adjuster on my 16" bbl w rifle length forearm.

The YHMs are MUCH cheaper than the DD rails.

Hope that helps.

mike

[azsugarbear]

Thanks Mike. I'll take a look at the YHM. Maybe a mid-length will be the ticket for me.

[Titleiiredneck]

spectre is a lil shorter and will come about 1/2" from the shoulder of the threaded muzzle

[winmdl98]

I have a YHM handguard that may interest you. I am working on a SBR with a Noveske 10.5" barrel. Originally I planned to us a YHM-5005 which is a Smooth Rifle Forearm with top rail and forward rails at 3,6,9 o'clock, that I have. Today a rifle length V-TAC was offered to me so he could upgrade to a LaRue. If the rifle length is something that will work for you, I need to recover some cash to do the V-TAC setup. Let me know.

[jonblack]

Here is a thread that you may find of interest.

jonblack

http://www.ar15.com/forums/topic.htm...=481490&page=1