Quarterbore.Net Forums


Go Back   Quarterbore's Forums > Knife Forums > Buck-184 Buckmaster Forum
Home Forums Classifieds Photo Server FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 06-17-2005, 09:42 PM
CAPT Bruce CAPT Bruce is offline
Junior Member
 
Join Date: Jun 2005
Location: Atlanta area
Posts: 9
Question New Buckmaster owner questions

I've recently acquired a Pre Patent Buckmaster and sheath. I'm looking for someone who can add a replacement for the small strap that secures the knife into the sheath right at the pommel.
Also looking for relacement pins (original or aftermarket) and the second generation Silva compass. Would appreciate any leads that can be passed along. Thanks in advance
Fair winds,
Bruce
Reply With Quote
  #2  
Old 06-18-2005, 01:02 PM
porterkids's Avatar
porterkids porterkids is offline
Super Moderator
M9 Bayonet Collectors Club
 
Join Date: Mar 2005
Posts: 675
Hi Bruce,

Replacement parts for the Buckmaster are not that easy to find. My only suggestion is to keep a steady watch on ebay. They do show up from time to time, but they are not cheap. The last set of spikes that I saw on ebay went for over $60.

The Buckmaster does not have a strap around the pomel. It only has the strap that crosses diagonally over the crossguard.
________
Honda XR350

Last edited by porterkids; 01-26-2011 at 06:57 AM.
Reply With Quote
  #3  
Old 06-18-2005, 01:44 PM
CAPT Bruce CAPT Bruce is offline
Junior Member
 
Join Date: Jun 2005
Location: Atlanta area
Posts: 9
Good morning porterkids,
Thanks for your response :)
I realize ebay may end up being one of the best sources, or I'll just have to find somebody skilled enough with a metal lathe to create a pair of the ss pins from the thread measurement of the holes in the guard and the nominal 2 inch length.
As to the diagonal snap strap, well the search begins. May be easier in the end to find a sheath that's missing its knife. Thanks again.
Bruce
Reply With Quote
  #4  
Old 06-18-2005, 06:20 PM
porterkids's Avatar
porterkids porterkids is offline
Super Moderator
M9 Bayonet Collectors Club
 
Join Date: Mar 2005
Posts: 675
I've been tempted in the past to buy incomplete Buckmasters, but when you figure in the cost of parts to make them whole and the time involved, you're better off just waiting until you find a deal on one that's complete. It winds up being cheaper.
________
Yamaha WR450

Last edited by porterkids; 01-26-2011 at 06:57 AM.
Reply With Quote
  #5  
Old 06-19-2005, 12:43 AM
CAPT Bruce CAPT Bruce is offline
Junior Member
 
Join Date: Jun 2005
Location: Atlanta area
Posts: 9
Hi Porterkids,
I've been pursuing a decent Buckmaster complete for a few years. When I had the chance to pick up this one with the basic knife and sheath (and 2 pouches) in fairly good condition under $100 I figured that gave me some room in my wallet to go searching for the balance of the accessories versus the $190 to 270 and more I was seeing bid for complete units. Besides the hunt is the fun thing, once you have it it just becomes a shelf item in the collection.
Fair winds,
Bruce :)
Reply With Quote
  #6  
Old 07-08-2005, 11:03 PM
CAPT Bruce CAPT Bruce is offline
Junior Member
 
Join Date: Jun 2005
Location: Atlanta area
Posts: 9
The 184 is coming together

Happy to advise the incomplete BuckMaster I acquired is now complete for all the major parts. Found an original Silva compass and pins to bring it up to full kit. Now I'll have to repair the Fastex type buckle and complete the handle survival accessories. :)

I've also gained a small supply of almost identical grapple pins if anyone is interested. ohneplo@comcast.net

Can anyone list the materials supplied (if any) in an original knife handle? Thanks
CAPT Bruce
Reply With Quote
  #7  
Old 08-19-2005, 08:23 PM
CZINGY CZINGY is offline
Junior Member
 
Join Date: Aug 2005
Posts: 1
Question New Buck 184 Member

I Was Given A Brand New Buckmaster 184 From My Grandfather Last Week. There Is No Paperwork With, The Knife Has "buck 184 U.s.a." On One Side And Has No Other Markings. A Compass Is In A Pouch And On Pommel. Wondering From What Year It Is From? Thank You.
Reply With Quote
  #8  
Old 08-20-2005, 02:48 PM
CAPT Bruce CAPT Bruce is offline
Junior Member
 
Join Date: Jun 2005
Location: Atlanta area
Posts: 9
Hi Czingy,
Can't cite the source but the following description was shared with me when attempting to date some of my Buckmasters.
"In 1986 the knives were stamped BUCK, 184<, U.S.A., PAT. PEND. This is also the time that Buck switched to forged blanks instead of conventional blanks. The only way to distinguish a forged blank from a conventional is to look at the end of the tang, which is not possible on an assembled knife.
In mid 1986, records show a change to adding the rope cutting serrations after bead blasting. They would have a ground finish whereas the rest of the knife, excluding the edge, would have a bead blasted finish. The 184BK was added in September 1986. This knife was identical in all aspects to the previous version except for a black oxide finish.
Effective November 1986, all Buckmasters were identified with U.S. Pat. #4622707. This identification was done by means of an adhesive sticker placed on the box. In Early 1987, this same designation was forged into the relief groove in the blade. Buckmasters from this point on did not have a date code. "
In your description were you indicating your knife has both the Silva compass in it's cloth pouch as well as a compass in the thread in pommel? That would make it a rare beast. Enjoy
Capt Bruce
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
History of the Buck-184 Knife: The Buckmaster Quarterbore Buck-184 Buckmaster Forum 0 03-23-2005 09:51 PM
History of the Buckmaster, Buckmaster Lite, Titanium, and M9 Quarterbore Buck-184 Buckmaster Forum 2 03-23-2005 09:38 PM
History of the Buckmaster, Buckmaster Lite, Titanium, and M9 Quarterbore Buck Buckmaster Forum 0 12-13-2004 08:01 PM
History of the Buck-184 Knife: The Buckmaster Quarterbore Buck Buckmaster Forum 0 12-13-2004 07:59 PM


All times are GMT -4. The time now is 10:40 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.