300 Whisper Owners... Please sound off!

[ducky]

built my 300 on a neskia bay action , mcmillan a5 stock, jewel trigger,ss krieger barrel 1 in 8 16.75 long. bult custom bedding block and did stock inlay my self.

[Titleiiredneck]

rem 700 action
built by GA Precision
mike rock 1-9 twist barrel 16.5
badger rings, base "20moa", and bolt knob
super sniper 10x
hs precision police stock
threaded 5/8x24
SWR omega 30 suppressor
teflon coated matte black by builder
stock duracoated dodo tan "open for ideas on recoating it"
harris 6-9 brs bipod

[GaryM]

Just put together my first whisper yesterday. I have built a few AR15s but decided to branch out. So I cannibalized an old XM177 clone I had, dropped a M1S barrel on it and now I have a 16" .300 whisper carbine. Nothing special, just an A2 type recievers, A2 stock and CAR handguards but when I took it to the range it displayed a lot of potential for accuracy. Now to just get it to cycle properly

22May08
Got it cycling fine, accuracy is good with subsonics and it looks like Missouri will be allowing suppressors soon. Life is good.

[PTK]

I have a M1S 300 Fireball upper, but it doesn't cycle properly as of right now.

Now to just get it to cycle properly

Same here!

[kdiver58]

M1S upper , DPMS lower , stock trigger, TAPCO adjustable stock, Armforte adjustable gas tube and my own knob mod so I can tell where the gas tube is set.

[Fastshooter03]

I have 2 right now. 1 on a Tikka Master Sporter and 1 16" AR. Both have Lilja 1x8 barrels.

http://www.quarterbore.net/forums/at...1&d=1228764057
http://www.quarterbore.net/forums/at...1&d=1228764057

Picture quality is low since I don't do it often.


Nick

[Malaga]

That Tikka Master Sporter looks incredible...

[Fastshooter03]

Originally Posted by Malaga

That Tikka Master Sporter looks incredible...

Thanks, I wish I could find another Half dozen of them.
I am thinking of building a mold of that stock and then making them out of composite for other rifles. Someday...


Nick

[pilot]

I'm more than a little ashamed to say that I joined this great forum back in March of 2007 in anticipation of beginning a 300 whisper SBR build and never posted....

Recently picked this project back up and need to get back up to speed. Lots of great information here!

No pictures yet but I'm almost there, final specs will be something like this:

SSK upper with 11.5" bull barrel (1:8 twist)
AAC Cyclone suppressor
Stag lower
Magpul PRS stock
YHM Rifle length light weight free float rail

[HotGuns]

I'm new to the forum but I've been shooting the Whispers for years. Currently have a .300/.221 Fireball AR, a Remington 700 that I built with a .300 Whisper reamer on a Shilen Match 1in 8 twist blank, and a Custom Shop TC Contender in .300 Whisper.

I am using a Form 1 Suppressor that I built. On the Rem, I get 3/8 groups at 100 yards using 8.2 grains of AA#5 using a 220 Sierra BTMHP. Thats my favorite gun for the .300, it is very quiet and deadly accurate.

For those that recognize the name, I am a moderator on the Defensive Carry.com forum which is geared to concealed weapons carriers around the country.

Hope to get some good info here. Whispers are one of my passions.