SBR AR15 barrel length?

[gds]

Did not find a specific post on this so figured I would ask with a poll.

What Length are you running for .300 blk in AR15?

What position is Gas port, pistol position or shorter?

Does it cycle without can for subsonic?

I have 16" barrel with carbine gas port and like it a lot, but I have an SBR and want to get one hopefully before next year hunting season, and trying to figure the most used lenght.

[HotLead]

I originally purchased a 16" Barrel from Tom (tp155) at Paladin Machine Service. Now that I received my SBR tax stamp, I had Tom cut it to 10.5", and rethread for a supressor.

I am also using Paladin Machine's Adjustable 3-position gas blocks; The adjustability of the gas block is nice, but I thought it was a pain in the ass to switch the gas black from supersonic to subsonic all the time; you never have a screwdriver when you need one! I was able to develop my handloads to cycle subsonic loads with my supressor using the supersonic gas port setting.

ETA: (I am running a pistol length gas system)

[snipecatcher]

10" TP555 barrel with his adjustable gas block in the pistol position. It cycles just about everything.

[Dacapster]

why was mine deleted? Or was a drinking and not posting ")

[gds]

I did not delete any posts. matter of fact not even sure that I can delete posts.

[Dacapster]

11.5 TP555 , pistol position W/adj gasblock....could not be more pleased.

I have to add a little off my low end charges to cycle w/o the can

[Retooferab]

10.5" pistol position port. I only shoot subs and it works every time! 8.6gns of N110 with 220gn SMKs.

[dvcguns]

TP555 9.5" / Pistol port
Runs sub 220SMK/168SMK with or without can 100%

Will be moving to supers soon

[Fritzcat]

10 1/2" pistol gas, TP555-3 way gas block with lever, thread 1/2"-28, YHM Wraith XL. 147gr to 180gr with Blue Dot and 200gr to 220gr with Lil Gun.