? for alleycat or anyone else using outlaw bullets

[hugginsvilleH&A]

What was your recipe for the load on the 240 outlaw bullets, I'm usually using either 1680 or 4227,(I run only subsonics)I also have 296 but never got to it since the 1680 worked so well. Any info would be greatly appreciated thanks and if you have load info on any of the other outlaw bullets lets here them! inquiring minds want to know thanks

[jimpa]

The ww296 worked well with my 240 SMK.in my bolt gun, used 9.6 grains

[dick]

In a 20" .308 win I have used 210gr and 225gr heavy brass like LC, FED, Lapua, with 12grs of IMR SR4759 and FED 215 primer. Both bullets loaded into the rifling. I will have to get back to you with the 300WTF load I don't have the info with me.

[fasttwist]

240 OUTLAW from 16 inch, pistol gas= 9.8 H-110 6.5 rem primer or 9.6 V-110.
Using 1680 I would start at 11.5 grains. What gas system and length of barrel are you running?

[Alleycat]

I run VVN110. 10 grs with a 240 OutLaw or a 240 SMK gets me about 1050ish out of my 16" gun. I run 8.9 grs out of my 10.5 Blackout for the same speed. What ever you load your 240SMKs will be close to the OutLaws.

In a 308 and a 225 RN OutLaw, I use 11.6 grs of Trail Boss for 1050.


300 Whisper and a 225 RN OL, I use 9.8 grs of N110

300 Black out and a 220 spitzer BT, 8.4 grs of VV N110

220 Out Law spitzer flat base. OOPS

[fasttwist]

How do those 220s look in that new 7.62 COVERT.

[Alleycat]