Quarterbore.Net Forums

TCCrewchief76 · #1 10-14-2010, 12:34 AM

http://www.pac-nor.com/photo_gallery/pacnut-clup-lg.jpg

You know what this is? Us Savage guys do...

Pretty cool,

Kevin

tp555 · #2 10-14-2010, 07:09 AM

I made 2 barrels for that nut already.It works.

Fritzcat · #3 10-14-2010, 08:06 AM

Is this the barrel I read about on another site as a Remage?

sharky47 · #4 10-14-2010, 09:30 AM

Is that a Savage style jam nut for setting the headspace?

TCCrewchief76 · #5 10-14-2010, 02:01 PM

Quote:

Originally Posted by sharky47

Is that a Savage style jam nut for setting the headspace?

Correct. If I am reading their website correctly, the nut and the cost to prefit combined is $190. This is $110 cheaper than it is to have them thread and chamber in the traditional manner. Now, if Remington would learn to manufacture replaceable bolt heads...

Spook · #6 10-14-2010, 07:25 PM

Been there, much more cost effective to buy a secondary bolt from PTG.
Have the same setup in 224TTH and 17M4...it works nicely

TCCrewchief76 · #7 10-14-2010, 01:57 PM

Quote:

Originally Posted by Fritzcat

Is this the barrel I read about on another site as a Remage?

I can't comment, as I don't know what PacNor is calling it.

TCCrewchief76 · #8 02-16-2011, 05:16 AM

A gunsmith on another forum that I'm in contact with is making nuts for just about everything now. I asked him if the prices would be competitive with what you could go buy an aftermarket Savage barrel for, and his answer was dang close. I've got 5 Mausers and a 1917 Enfield with a shot-out barrel that I might have to get barrels for :-)

Kevin