anyone here make whisper barrels for bolt guns

[sgms18]

anyone here make whisper barrels for bolt guns?

[Hoser]

PM sent...

[alorton]

Originally Posted by Hoser

PM sent...

Does that mean you do? If so, I'd be interested as well.

[Hoser]

Nevermind. You said barrels, not brass. I am a dumbass.

[snipecatcher]

I got mine from Shilen. 18", varmint profile, threaded, it came out to about $315. They call it 30/221 on their list of chamberings.

[sgms18]

Originally Posted by snipecatcher

I got mine from Shilen. 18", varmint profile, threaded, it came out to about $315. They call it 30/221 on their list of chamberings.

Are they 1:8?

[sha-ul]

Originally Posted by snipecatcher

I got mine from Shilen. 18", varmint profile, threaded, it came out to about $315. They call it 30/221 on their list of chamberings.

You and I ordered almost the exact same thing, only I spec-ed mine @17" with a 1:8 twist

after researching here& elsewhere I found that shooting subs you don't gain any more velocity beyond 16", I also wanted to thread it for a someday suppressor (I wish the SAF would challenge the nfa34) I also wanted a little room to play if I had to cut off the threads, or rethread