Where to get thread adaptor?

[JimM44]

Well I bought the M1S barrel which from everything I read is 1/2-36. I didn't order a different option BIG MISTAKE.

I called Gemtech to get a quick mount for my HVT quess what they don't make one in that thread pattern.

So do you guys know where I can get a thread adpator for the 1/2-36 to 5/8-24 which is the quick detach that comes with my HVT?

Edit: WOW, I got it and I'm impressed check my reply on page 2.

[sharky47]

If you don't find a source, I am a machinist and could make you one - already made a custom flashhider for my M1S barrel.....

[lovdasnow]

check with TROS

[Artful]

http://www.tacticalinc.com/1228-5824...or-p-1036.html

Thread adapter 1/2-28 to 5/8-24 with 5/8-24 thread protector.

TROS adapters are manufactured from 300 series stainless and are black oxide coated. They are guaranteed to be concentric.

[JimM44]

Nice link and I checked their web page BUT they don't make what I need.

The link is for a standard 223 thread to 308, what I need is 9mm to 308.

The M1S barrel has 1/2-36 not 1/2-28, they make them so you can't acidentally put a 223 flashider on it by mistake but it's not 308 which is what the barrel is.

[Artful]

Originally Posted by JimM44

Nice link and I checked their web page BUT they don't make what I need.

The link is for a standard 223 thread to 308, what I need is 9mm to 308.

The M1S barrel has 1/2-36 not 1/2-28, they make them so you can't acidentally put a 223 flashider on it by mistake but it's not 308 which is what the barrel is.

sorry too late at night- shouldn't have been posting I guess - they do carry TROS adapator in 1/2x36 but not to 5/8 - Any good machinest can make one as long as they single point the threads and make sure to make it concentric.

Here's a link to AAC's thread gude spec's
http://www.silencertalk.com/forum/viewtopic.php?t=6773

TROS I'm sure can do it but it will take awhile your local shop may be looking for work so quick turnabound.