Quarterbore.Net Forums

Go Back   Quarterbore's Forums > 300 Whisper Forums > 300 Whisper Ammo and Reloading
Reload this Page 30-221 Short Headspace?
Home Forums Classifieds Photo Server FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 01-02-2009, 08:05 PM
Fastshooter03's Avatar
Fastshooter03 Fastshooter03 is offline
Member
  
Join Date: Nov 2008
Location: WI
Posts: 49
30-221 Short Headspace?
Has anyone tried running a shorter headspace version of the 30-221 for use with subs only?
I was thinking the same OAL or maybe a shorter oal with the headspace further back the neck length would be increased and since those big bullets go so far into the case that might help?
There would be a limit to what you could do even with trimming the sizing die but it would be possible.
Just throwing the ???s out there to hear some pros-cons.

Nick
__________________
"A bullet sounds the same in any language"- S.G.
"If you ever hear it is another matter"-N.K.
Reply With Quote
  #2  
Old 01-03-2009, 01:43 AM
320pf 320pf is offline
Senior Member
  
Join Date: Jun 2006
Posts: 304
Quote:
Originally Posted by Fastshooter03 View Post
Has anyone tried running a shorter headspace version of the 30-221 for use with subs only?
I was thinking the same OAL or maybe a shorter oal with the headspace further back the neck length would be increased and since those big bullets go so far into the case that might help?
There would be a limit to what you could do even with trimming the sizing die but it would be possible.
Just throwing the ???s out there to hear some pros-cons.

Nick
Nick,

What are you trying to achieve or problem you are trying to solve by shortening the headspace?

320pf
Reply With Quote
  #3  
Old 01-03-2009, 07:50 PM
Fastshooter03's Avatar
Fastshooter03 Fastshooter03 is offline
Member
  
Join Date: Nov 2008
Location: WI
Posts: 49
I was thinking of taking away some case volume to maybe get away with a more consistent or lighter powder charge although I don't know what kind of load density is currently happening.
The faster burning powder charges like 7 grns of N330 with 220 mkgs? Or the really light charges of 4-5 grains for a subsonic 125?
The other thing was to compensate for the short 221 case oal I'm getting. I need to go to 1.350" to clean them up.
So that would be .050" less headspace if I wanted the longest neck possible with my reamer.
I know brass problems are no reason to make a different chamber but I plan on making a couple more 30-221s and it's not that hard to deepen a chamber.
I know throating might be needed as well with 220s.

Nick
__________________
"A bullet sounds the same in any language"- S.G.
"If you ever hear it is another matter"-N.K.
Reply With Quote
  #4  
Old 01-22-2009, 08:50 PM
Fastshooter03's Avatar
Fastshooter03 Fastshooter03 is offline
Member
  
Join Date: Nov 2008
Location: WI
Posts: 49
OK, here's what I'll most likely do.
7.62 x 30mm. 1.200" case length. Trim a new set of dies down .200". Subsonic only. Make spacers for 10 and 20 rd mags due to the short OAL if used in and AR. Thinking I might do a bolt gun first.
If I can get 1050 fps with smaller charges and less fps deviations it will be a success as long as accuracy isn't affected somehow.

Nick
__________________
"A bullet sounds the same in any language"- S.G.
"If you ever hear it is another matter"-N.K.
Reply With Quote
Reply

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Hybrid Mode Hybrid Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 10:21 AM.
Contact Us - Quarterbore's Forums - Archive - Top

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.