Brass Prices

[Hoser]

Whats the going rate for 300 Whisper brass formed from virgin Remington 221 brass?

I processed a bunch on my Dillon 1050 and realized I really didnt need 5,000 pcs.

[320pf]

Originally Posted by Hoser

Whats the going rate for 300 Whisper brass formed from virgin Remington 221 brass?

I processed a bunch on my Dillon 1050 and realized I really didnt need 5,000 pcs.

Hoser,

What did you put together for your 300 Whisper project?

I pretty much did the same thing. I made about 3000 pcs from 223 brass... Man you should see the pile of brass cuttings

But I figure that I will shoot them all in the up coming 3-gun matches

320pf

[Hoser]

I built a Lilja barreled 8 inch upper to play with. Should go well with my Shark Ti can.

And I also have a 17.0 inch Lilja barrel for a Remington 700. Waiting for the stock to show up so I can work up a load for it. If I ever get any 302 Whisper chamber and reloading data, I will just recut the chamber.

I tried to cut back some 223 brass, but that just took waaaaay too much friggin time. 221 brass much easier and faster.

Run them through my 1050, trim/chamfer them on my Giraud and its off to the races.

I am still going to stick with a 223 for IPSC though.