Savage Project
I built my first whisper on a savage 200. I was able to buy a rifle from a friend for 225. I purchased the barrel from Sharpshooter supply. They did very good work. Heavy barrel, 10 twist, 20 inch. I put the action into a fiberglass stock from Brownells. My scope of choice is a Nikon Monarch 3.3-10 with Mil Dot. I was supprised at how well the rig shoots, 1/2 moa most of the time. I have only used brass formed from military 223 with no crimp. My process is pretty simple. Clean very well, lube(I use a spray made from RCBS lube dissolved in alcohol, dries quickly) run them through the forming die. I made a jig to hold the formed brass and I cut to the shoulder on a band saw with a metal cutting blade. Then it's trim as normal to finish length.
|