Hello Kanttori, you just might purchase the current Sierra reloading manual for any info on reloading with VV powder.
Here are some quotes Ï have read.
______________________________
__________________________________________________ ______
Bullet : 220 grains Match King HPBT
Powder: Vihtavuori N110
starting load: 9.4 grains (Bullet speed = 1000 feet per second)
maximum load: 11.6 grains (Bullet speed = 1250 feet per second)
Bullet: 220 grains Match king HPBT
Powder: Vihtavuori N120
starting load: 11.5 grains (Bullet speed = 1000 feet per second)
maximum load: 13.4 grains (Bullet speed = 1200 feet per second)
__________________________________________________ ______
Bullet: 240 grains Matchking HPBT
powder: Vihtavuori N110
starting load: 8.9 grains (Bullet speed = 950 feet per second )
maximum load: 10.5 grains (Bullet speed = 1150 feet per second)
Bullet 240 grains Match King HPBT
powder Vihtavuori N120
Starting load: 10.5 grains (Bullet speed = 950 feet per second )
maximum load: 12.5 grains (Bullet speed = 1150 feet per second)
Primer used for all loads: Federal 205M
Just let me know if you like the results, since I am planning to use them when my SIG is ready.
Good luck!!!!
Buckshot
Quote:
|
Originally Posted by Kanttori
Hello,
Since I live in Finland I have very limited access to any other powders than Vihtavuori. So if someone has a good SUBSONIC loading data using Vihtavuori powders, please share it here!!!
I'm going for either Sierra 220grs HPBT or 240grs HPBT bullets. I have 10.5" barrel with 1/8" twist.
|