|
I have SSK built rifles and Noveske barrels....nothing "special" with the feed ramps on either...the SSK is the least "modern" of the two its ramps are narrow and the receiver squares off with the ramps, no taper....but works great, with the right mags!!!!
+1 on if it aint broke don't fix it and on taking the rib out of the pmags as Pitt300 suggested, works great to tune the magazine for this cartridge....I do the same just a little different....I use 11/16" bedding tool....disassemble the mag, hold the mag body vertical insert and pull down the bedding tool a few times and it cuts out both ribs at the same time....works great on the 20 and 30 round pmags....I had been milling the first few inches of the rib out of the metal mags as SSK does on their rifles...seems to work well also....but the file or bedding tool on the pmags is pretty easy and fast...
kurtz
|