Posted :: 6/22/2004 9:47:05 PM
The new AR-10 is still on it's way[:/]
www.jobrelatedstuff.com/forums/topic.html?b=7&f=120&t=209814
As for the pictures of the BAR-10, vs the AR-10. the AR-10 will be much easier to use with the LL then the BAR-10. Compare the two pics that follow...
and
Note that the rear pivot in the AR-10 is in the same location in the AR-15 and AR-10 relative to the FCG pins. Now, notice how much further to the rear the AR-10 take down lug is. What this means is that the BAR-10 would require some type of new pivot added, which I believe is quite possible, while the AR-10 should be able to be used with the link pivoting on the rear takedown pin.
Also, M60Howard here on the forums has offered to work with me on the milling and I am likely going to take him up on the offer so we can get this done. I just don't want to pull my Eagle a part but if this AR-10 carbine doesn't get here soon I may just pull my KAC 2-stage and start working with the lower on hand especially now that I have an M16A2 FCG on hand to use with the AR-10 to allow me selective fire....