Quote:
Originally Posted by Hoser
Please keep in mind that there are many flavors of the 300 Whisper/Blackout out there. I do all the heavy lifting for you, I trim it to 1.355 and take care of the primer pocket crimp. With some chambers you can just add a primer, powder, bullet and you are good to go. Other chambers you might have to run the brass through a full length resize die. I strongly recommend doing it anyway, but that is just me. I even full length resize all brass, virgin or not. I would rather ship brass that needs the shoulder pushed back a couple thousandths than send you overworked brass that will cause headspace issues and short brass life.
|
Just finished up another bunch of 300 Whisper Rimmed (parent case, 357 max) brass for a friend.
Please send me a PM or an email before you send me any 223/5.56 brass to process so I have a way to contact you.
__________________
--------------------------------------
--------------------------------------
I load and shoot the brass I make
Last edited by Hoser; 07-21-2013 at 05:49 PM.
|